Maple and Zebrawood Bed

With All Due Respect:

It would be nice if you put some “Construction Details”, “Sizes”, “Finish” etc. with this Project and “Lightened up the Pics so we could see them better.

Might very well be the reason I’m the only one to Comment in the 3 Hours it’s been up.

-- ENJOY YOURSELVES GUYS!!!

Good job!! Looks great, agree with Rick.

-- Jack, Albuquerque

Nice looking bed…beautiful border collie too. We’ve got a 10 y/o ourselves.

Thank you OS. Plans are GREAT!!

-- ENJOY YOURSELVES GUYS!!!

very nice bed, could l make a simular bed to this but king size?
I want to make my son a king size bed, but is 6 ft tall and 300 lbs so need to make extra strong.
Could you email me to tell me measurements and how you secured side rails to head and foot boards is there a kit l should order on line etc?

Thanks Jim

-- jim

Jim,
certainly make the bed! I used maple bed slats to support the mattress (3 slats about 3 inches wide by almost an inch thick) . The slats are secured to the side rails using hardware I found a Rockler. My son is about 5’-10” and weights about 260 and the bed has no problems with him.

good luck

-- OS, Burleson, TX