|Project by tswoodwizard||posted 03-20-2011 08:23 PM||1850 views||2 times favorited||8 comments|
Made a set of 4 shelf and rod units for a friend out of Poplar. Shelf is 12” dp.x38”wide x 1” thick. Support brackets are 1 1/4”thick x 15”dp. x 13” high. Rods are shaped o/o 2×2 Fir square stock to achieve a full 1 1/2” Dia. and captured by a 1/2” dp. pole socket hole in the support bracket. Added my own idea for a good profile on the brackets as well. Shelf is elevated as an added detail feature. These wil be mounted to the wall via-the under shelf back board. Thay will be top coated with an oil-based, off white “Pickled” varnish. It was just a small project, but lots-a-fun.
-- Tim B. Sweely Elizabeth, Illinois, firstname.lastname@example.org -------- My potential is limited only by my emagination.