This is my first try at a raised panel vanity. Turned out pretty good but could have been better. I think I should have started with regular rail and stile but loved the 45 degree mitered doors I saw on MLCS and had to try it. It killed me to paint it white but that is what they wanted. The doors were done first so the 45 degree miters are not very good. But it did make me build a 45 degree jig for on the table saw. Thanks to all of the lumberjocks who posted their 45 degree miter sleds it helped immensely in building mine.
5 comments so far
GaryL
home | projects | blog
987 posts in 1027 days
#1 posted 824 days ago
Turned out great! Nice work on the doors and drawers. What bit did you use to make the rails and stiles?
-- Gary; Marysville, MI...Involve your children in your projects as much as possible, the return is priceless.
747DRVR
home | projects | blog
199 posts in 1553 days
#2 posted 824 days ago
Looks great,especially installed.
Dan Hux
home | projects | blog
527 posts in 1571 days
#3 posted 823 days ago
great job,,looks like a lot of work
-- Dan Hux,,,,Raleigh, NC http://whitdaniel.com
kine97/Theresa
home | projects | blog
121 posts in 1975 days
#4 posted 823 days ago
I love the details of the doors & drawers.
Great job
-- "My formula for living is quite simple. I get up in the morning, and I go to bed at night. In between, I occupy myself as best I can." -Cary Grant
Ken90712
home | projects | blog
12849 posts in 1385 days
#5 posted 823 days ago
Great work, love the raised panel doors!
-- Ken, "Everyday above ground is a good day!"
Have your say...