Newer version of a recently posted cutting board

  • Advertise with us
Project by blackcherry posted 03-15-2011 02:25 AM 2588 views 15 times favorited 20 comments Add to Favorites Watch

Last week I posted this style cutting board and over the week-end I made another with some added changes. Instead of the dovetail key I decided to laminate a thin piece of rosewood between the B.E.Maple. The lifts and bows are made from Rosewood which add some richness to the B.E. maple surface. I really like how this board came out and plan on keeping this one in house. Thanks for viewing and have a great week LJ’s…Blkcherry

20 comments so far

View whitedog's profile


652 posts in 3456 days

#1 posted 03-15-2011 02:35 AM

I thought the other board was almost perfect… well this one is a few steps closer. Great board.

-- Paul , Calfornia

View pickpapa's profile


129 posts in 2660 days

#2 posted 03-15-2011 02:38 AM

Very clean look! I’m diggin the accent colors here. Are the feet fully locked in by the dove tail or did you just add a piece at the end for the effect? Whatever the case, it’s a great board. I haven’t posted anything yet, but I do have a board I made for my wife’s Christmas gift. Might get the nerve to put it up soon. Everything I have seen on LJ so far puts my stuff to shame. Thanks for sharing.


-- Chuck.. aka Pickpapa`'`'`'`'`'` The Son is the radiance of God's glory and the exact representation of His being, sustaining all things by His powerful word. Heb. 1:3

View Lenny's profile


1593 posts in 3526 days

#3 posted 03-15-2011 02:40 AM

Wilson, what a fabulous board. The birdseye maple is so full of figure and that rosewood is to die for. What a rich tone it has. This is a beautiful cutting board. I like the design change. Kudos! Well done my friend.

-- On the eighth day God was back in His woodworking shop! Lenny, East Providence, RI

View Ken90712's profile


17556 posts in 3188 days

#4 posted 03-15-2011 02:55 AM

BC Nice job, very cool design. I was surprised at the last pic on how you made the dovetails. I first thought it was inlay… Great job all the way around on this!!!!!!

-- Ken, "Everyday above ground is a good day!"

View Beginningwoodworker's profile


13345 posts in 3672 days

#5 posted 03-15-2011 03:17 AM

Neat cutting board.

View blackcherry's profile


3338 posts in 3822 days

#6 posted 03-15-2011 04:02 AM

whitedog and Charles thanks for the kind words.

Pickpapa, the dovetail lift is a though dovetail. Having a Incra fence on the router table allow you to fit the tail with very little resistance.

Hey Lenny thanks for the kind comments. The rosewood really set this board off. A few years ago a gentleman sold me a box’s of blanks not knowing what he had on hand. I couldn’t get the money out of my wallet fast enough. When I got home I counted over 40 blanks which turn out to be marimba blanks from Ludwig the percussion instrument manufacture. Each piece has the note tone stamp on each blank, these were factory seconds, they measure a full 1 1/4×2” x 14 long roughly. I use these piece sparingly due to the value and shear beauty. Thanks for viewing ….Wilson

Hey Ken how you doing, thanks for viewing.

View Karson's profile


35121 posts in 4400 days

#7 posted 03-15-2011 04:07 AM

A great looking board. Nice job on the build.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia †

View BreakingBoardom's profile


615 posts in 3081 days

#8 posted 03-15-2011 07:31 AM

This board is awesome. I can see why you’d want to keep it for yourself. Fantastic work.

-- Matt -

View tdv's profile


1188 posts in 3069 days

#9 posted 03-15-2011 10:36 AM

Nice work would you do a blog on the making & fitting processes of the bowties/double dovetails?

-- God created wood that we may create. Trevor East Yorkshire UK

View SPalm's profile


5320 posts in 3881 days

#10 posted 03-15-2011 12:47 PM

Hey BC, nice additions. That is a really handsome board. Just enough bric-a-brac to be special but not too much. And re-using the dovetail for the feet is just special. I can see why you are going to keep it.

Good job Sir,

-- -- I'm no rocket surgeon

View mafe's profile


11725 posts in 3088 days

#11 posted 03-15-2011 12:58 PM

Sweet indeeeet.
Best thoughts,

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

View lumberdustjohn's profile


1263 posts in 3166 days

#12 posted 03-15-2011 04:24 PM

Another beauty.
Great pic’s also.
Thanks for posting.

-- Safety first because someone needs you.

View Roger's profile


20928 posts in 2803 days

#13 posted 03-15-2011 04:55 PM

that is very awesome! the turnout is fantastic w/ the wood combo. very very nice
what is the finish?

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View itsmic's profile


1419 posts in 3118 days

#14 posted 03-15-2011 05:05 PM

Very nice board, your design is eye catching, and the wood combination and beauty outstanding, thanks for sharing

-- It's Mic Keep working and sharing

View cwdance1's profile


1158 posts in 3258 days

#15 posted 03-15-2011 10:29 PM

Way cool looking design, wish I could do work like that. Great job.

showing 1 through 15 of 20 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics