LumberJocks

Check out some shop built tools.

  • Advertise with us
Project by hardhead posted 1253 days ago 3673 views 12 times favorited 10 comments Add to Favorites Watch

I built these jigs to use on my Delta table saw. They have proved to be very useful. The 90 degree sled was built first. Using 3/4 Birch ply with walnut rails. The zero clearence Dado insert was made from a piece of Coriaun counter top. The cross cut sled was built with 3/4 Ply and walnut rails. I added a stop slide on the top for those repeat cuts and a safety box on the back with safety plexiglass to keep my fingers iin tact. Enjoy. Hard Head.

-- HardHead.





10 comments so far

View gpastor's profile

gpastor

150 posts in 1660 days


#1 posted 1253 days ago

Nice jigs hard head, How did you get the wife to let you have shop stuff in the living room?

-- Gray hair is a crown of splendor; it is attained by a righteous life. Proverbs 16:31

View hardhead's profile

hardhead

56 posts in 1255 days


#2 posted 1253 days ago

I use the table saw as a dining room table. Just kidding. Thanks for the post. She’s in charge of photos. I cant do it all. So I bring the projects to her. Don

-- HardHead.

View SgtSnafu's profile

SgtSnafu

957 posts in 1874 days


#3 posted 1253 days ago

Great looking sleds – Well done..

Thanks for sharing.

Oh.. and BTW: Welcome to Lumberjocks ! Lots of great ideas, info, inspiration, and support here (as many will tell ya – the site is quite addictive).. Enjoy…

-- Scotty - aka... SgtSnafu - Randleman NC

View Gary's profile

Gary

6994 posts in 2035 days


#4 posted 1253 days ago

Don, nice sleds. Glad you found us.

-- Gary, DeKalb Texas only 4 miles from the mill

View jockmike2's profile

jockmike2

10635 posts in 2849 days


#5 posted 1253 days ago

Welcome and thanks for the ideas.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View steliart's profile

steliart

1807 posts in 1290 days


#6 posted 1253 days ago

nice sleds, welcome to LJs

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --

View Dusty56's profile

Dusty56

11639 posts in 2290 days


#7 posted 1253 days ago

Nice , clean and well made , useful projects : )
Welcome aboard !

-- I'm absolutely positive that I couldn't be more uncertain!

View Robsshop's profile

Robsshop

807 posts in 1577 days


#8 posted 1253 days ago

Welcome to L J’s Hardhead,Those are some useful shop aides You have put together and they should bring You hours of safe and reliable operations at the TS ! I love TS sleds and how they make life easier and predictable. Thanks for sharing and looking forward to Your next post.

-- Rob,Gaithersburg,MD,One mans trash is another mans repurposed wood shop treasure ! ;-)

View BTKS's profile

BTKS

1967 posts in 2066 days


#9 posted 1253 days ago

Welcome to LJ’s. Good looking tools!

-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)

View hardhead's profile

hardhead

56 posts in 1255 days


#10 posted 1252 days ago

thanks for all the post. Don

-- HardHead.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase