or Join Now!
Custom cubbies with maple face frames and birch ply boxes. i used pocket screws to make the boxes and mortise and tenon for the face frames. not exactly furniture but this is what ive been up too lately (gotta pay the bills:))
home | projects | blog
19 posts in 1959 days
Preview this project card
60 posts in 2090 days
#1 posted 02-16-2011 04:58 PM
Those look great. I’ve been needing to put something in our mudroom for a long time now (the metal snap-together shelves just aren’t cutting it). How wide front-to-back are the seats? I was wondering how much extra space the seat would need to accommodate both a person and the hanging items so it didn’t feel like you were sitting under a wet raincoat when untying your shoes.
Any chance you have more photos? Thanks for posting!
891 posts in 2185 days
#2 posted 02-16-2011 05:01 PM
The look great and paying the bills is a GOOD thing
-- Just learning the craft my Lord and Savior Jesus Christ practiced.
#3 posted 02-16-2011 05:05 PM
Hey, just sent a link to your project for my wife to look at as an idea for our mudroom. Her response – “Oh my god yes!!!! I love it!!!!”
Sounds like my honey-do list just grew by one set of mudroom cubbies.
576 posts in 2675 days
#4 posted 02-16-2011 05:06 PM
very nice work,,looks great
-- Dan Hux,,,,Raleigh, NC http://whitdaniel.com
610 posts in 2214 days
#5 posted 02-16-2011 05:41 PM
looks very nice
-- Life is enjoyable especially when you borrow from people
#6 posted 02-16-2011 05:45 PM
thanks for all the comments!
steopa the seats are 20” deep (seat) and each cubbie ended up being 22” wide. more pics to come once i learn how to do it:)
414 posts in 2087 days
#7 posted 02-16-2011 08:58 PM
Very well done. Great proportions. All the trim work makes it stand out. Thansk for sharing.
-- Glen - Vancouver, British Columbia, Canada
257 posts in 3011 days
#8 posted 02-17-2011 02:56 AM
Looks great! I’m building something similar for my master bedroom closet. Did you build yours in place and then spray it? If so, how tough is it to get paint on the back of the shelves?
-- Ron, Northern Illinois
13347 posts in 2973 days
#9 posted 02-17-2011 03:03 AM
Very nice built-in.
418 posts in 1979 days
#10 posted 02-17-2011 03:06 AM
Great job. it looks fantastic.
14 posts in 1976 days
#11 posted 02-17-2011 05:01 PM
I’m on the hook to build a set of cubbies in our mud room and this looks like a great jumping-off point. Any chance you could share any details on cut list, dimensions, etc?
We’re brainstorming and seeing this will really help narrow down our design.
Thanks for sharing!
-- -I'm new here, but feel just as capable of making firewood as the next guy.
#12 posted 02-17-2011 06:31 PM
I built these cubbies in place and then brushed on an oil based primer and than 2 coats of a semi-gloss. As for the dimensions the whole built-in is 14’ long, 8’ tall. the seat is 24” off the floor the “open” is around 5’ (cant really remeber ill have to try to find my sketch). each cubbie is 22” wide and 13”deep. i didnt make a cut sheet for this project cause i designed it as i went. hope this helps
16 posts in 2081 days
#13 posted 02-17-2011 07:34 PM
What type of profile do you have for the moulding on the panel?
#14 posted 02-17-2011 09:14 PM
Thanks for the reply John. Your painting skills are up there with your woodworking skills. I hope my project turns out half as good as yours.
#15 posted 02-17-2011 09:39 PM
the trim used for the panels is a 1 3/8 base cap that my local lumberyard stocks.
and i have to correct my painting statement the semi-gloss coats were sprayed on not brushed.
View all comments »
showing 1 through 15 of 17 comments
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics