or Join Now!
shelf peg jig
-- Kiefer / It's all about design and innovation
home | projects | blog
4818 posts in 2028 days
Preview this project card
3458 posts in 3296 days
#1 posted 02-13-2011 06:04 AM
Kiefer,Welcome to LumberJocks. That is a pretty cool jig, thanks very much for sharing.
-- Chris L. "Don't Dream it, Be it."- PortablePastimes.com (Purveyors of Portable Fun and Fidgets)
196 posts in 2259 days
#2 posted 02-13-2011 06:45 AM
Creative jig. I would build something like that too, but i hate the look of shelf pin holes.
Could be converted for dowel joint holes drilled on the face of a board too.
649 posts in 2142 days
#3 posted 02-13-2011 01:55 PM
Actually, very pellucid mud!
As the index hole size is independent of the final hole size, would larger size index holes and pin improve the registration and lessen wear ?
-- Don, Somerset UK, http://www.donjohnson24.co.uk
#4 posted 02-13-2011 03:29 PM
hi don any size pin and will work i chose a 1/4”pin to make the alignment of the bit and pin easy as this is very criticaland it also makes the index strip smallerafter many uses there is no noticeble wearto switch to a larger bit just change the bit the center stays the samehope this helps
1817 posts in 2049 days
#5 posted 02-13-2011 04:45 PM
a good registration technique
-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions - http://www.steliart.com --
11799 posts in 3049 days
#6 posted 02-13-2011 07:11 PM
Simply perfect idea : )
-- I'm absolutely positive that I couldn't be more uncertain!
16807 posts in 2550 days
#7 posted 02-14-2011 12:29 AM
-- Ken, "Everyday above ground is a good day!"
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics