LumberJocks

Tablesaw cabinet

  • Advertise with us
Project by Tinnocker posted 1293 days ago 1669 views 3 times favorited 4 comments Add to Favorites Watch

My Ryobi table saw came with a folding stand and no wheels so I came up with this cabinet to make it much more stable. I also made my version of the supersled and improved the fence. The cabinet has 2 sections one in back with a 4 inch DC port and the front for storing the jigs and parts for my supersled. the wheels lock and the bench is also an effective outfeed table.

-- Ted, Browns Mills, NJ http://www.twhgrafx.com/blog/ Darn! I cut it 3 times and it's still too short! I get ideas for things that I can make to make things easier for me to make!





4 comments so far

View EEngineer's profile

EEngineer

887 posts in 2239 days


#1 posted 1292 days ago

I am most intrigued by the extension you did on the back of the saw… More pictures?

-- "Find out what you cannot do and then go do it!"

View Tinnocker's profile

Tinnocker

105 posts in 1626 days


#2 posted 1292 days ago

Hi EEngineer, I posted 3 more pics and the batteries died, go figure. I’ll run out tomorrow and pic some up. Do you need more pics?
Basically I used recycled plywood to make the extension I cut 3 sides with a miter joint, glued & screwed them all together. Then I used 4 pieces to support the front of the extension by the saw and bolted it with 1/4-20 bolts,nuts and flat & lock washers. I then made the gussets to fit. I put flanges on to have more meat to screw to. After the extension was done I dado-ed the 2 slots for the sled. The only reason I made the extension was so that I could make the sled big enough to do more crosscutting. With the extension bolted on the 2 extend able wings do not move, but I find that I don’t need them with the sled and my roller stand.
If you are going to make one let me know and I’ll send you the dimensions. I hope to have a Sketchup of it soon.

-- Ted, Browns Mills, NJ http://www.twhgrafx.com/blog/ Darn! I cut it 3 times and it's still too short! I get ideas for things that I can make to make things easier for me to make!

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2298 days


#3 posted 1292 days ago

Neat idea.

-- CJIII Future cabinetmaker

View EEngineer's profile

EEngineer

887 posts in 2239 days


#4 posted 1292 days ago

Naw, no need for dimensions or more pics, the extra pictures give me the idea. Besides, my saw dimensions are way different. Neat idea, I’ll have to think about this. I’ve been planning to build a better base for my table saw for a while; an extension like this would be a plus!

-- "Find out what you cannot do and then go do it!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase