LumberJocks

Router table and lift

  • Advertise with us
Project by Tinnocker posted 02-05-2011 07:28 PM 2077 views 1 time favorited 1 comment Add to Favorites Watch

I made some improvements to my router table. First was the lift, I used 4 drawer slides from a recycled dresser found on the side of the road. Then I took some MDF and made the top thicker and more level ( I have been wanting to do this for forever) and I had to redo the fence. I painted the top with black epoxy and the base grey. I moved the switch to the side so I could put doors on the front (I cut down some recycled doors from another piece of furniture I got while dumpster diving!) I also added a 4 inch port to hook up to my Delta DC (50 bucks on Craig’s List! Hooah!)

-- Ted, Browns Mills, NJ http://www.twhgrafx.com/blog/ Darn! I cut it 3 times and it's still too short! I get ideas for things that I can make to make things easier for me to make!





1 comment so far

View ChrisCarr's profile

ChrisCarr

196 posts in 1643 days


#1 posted 02-05-2011 09:04 PM

Is that router lift from american woodworker plans?

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase