|Project by Asher||posted 01-30-2011 05:17 AM||3479 views||15 times favorited||8 comments|
I posted some upgrades I had made to my tablesaw some time ago but at that time the fence and dust collection box was not complete. I completed some time back but have not gotten around to posting it. The fence body is pretty strait forward. It is plywood with slots routed in between the dividers to allow the melinine fences travel for bit size. I tap 1/4×20 threads to attach it to my tablesaw fence so when set it is rock solid. The dust box is angle on the back side to allow the side door of the saw to be opened as needed. After it was set in place I decided to build a draw bo for storage to make the must of the space. All in all I have been pleased with it. A mico adjustment attachment for my tablesaw fence would be great for use on both my saw and router. Hope you jocks like!