or Join Now!
I made this for a customer to match an existing Ethan Allen desk. Its on the third floor of an old town house and had to lifted through the window by piano movers
home | projects | blog
443 posts in 1997 days
Preview this project card
1893 posts in 1936 days
#1 posted 01-26-2011 11:51 PM
Work looks good.
Here’s a small hint – open the graphic in MS Paint, or any other graphic editor and “Rotate picture 90 degrees counter-clockwise (left)”. It would make your work look a LOT better! :-)
-- Robert Rhoades WoodWorks / Email: firstname.lastname@example.org / www.rhoadesclan.com
4145 posts in 1819 days
#2 posted 01-27-2011 01:17 AM
Looks great! But how do you get it to stay on the wall like that. ;-)
Seriously, it’s looks like a very well done set. The photos are a little blurry—what type of wood and finish did you use?
-- "hold fast to that which is good"
#3 posted 01-27-2011 07:51 PM
Idid rotate it, but somethjng on the LJ causes the photo to be cropped off as if you had not rotated it. So I gave up.
#4 posted 01-27-2011 09:38 PM
I used a wiping varnish over gel stain.
1 post in 1528 days
#5 posted 02-12-2011 10:56 PM
Hi Mcase… i love your bed design. I also have a Festool for the spindles too. Is there any design drawings that you could afford me?? Thanks, Jay
#6 posted 02-13-2011 01:55 AM
Unfortunately this bed was designed was in my pre-Sketchup days. I drafted it on graph paper. I would be glad to share, but the plans are on paper not a disc or hard drive and I don’t know how to forward them.
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics