|Project by bandit571||posted 01-24-2011 07:08 AM||1020 views||0 times favorited||3 comments|
I use about five different woods for this little quilt rack. The Finials are just a couple shaker pegs. Those slats were bandsawn to shape, and then a spokeshave was used to round each end. The “fat” part in the middle of each slat tapers down to a knife edge, and was done with a block plane. Curved top rails were bandsawn to shape. Wedges hold the spindles in place in the top rails. Just playing around with some scrap wood on hand.
-- A Planer? I'M the planer, this is what I use