LumberJocks

Nifty Napkin Holder

  • Advertise with us
Project by rotorwash posted 01-23-2011 09:55 PM 4053 views 4 times favorited 2 comments Add to Favorites Watch

I made about 10 of these for Christmas presents. Half were made with maple and cherry. The other half with beech. I believe I got the plans from Wood Magazine although I don’t recall the issue (I could dig it out if need be). All were made with scraps from other projects so basically the materials cost nothing. I don’t know much about finishing so I experimented. Some were finished with boiled linseed oil & poly. Others with boiled linseed oil alone. A few were finished with just spray on poly.

-- Jon, California





2 comments so far

View Bill Davis's profile

Bill Davis

226 posts in 3677 days


#1 posted 01-24-2011 12:05 AM

Niftey for sure. I made a couple for gifts also using some contrasting local woods. Good use of small cut-offs. I cut a bunch of extra pieces with the intent of making more but haven’t gotten back to it.

View Rosepedal27's profile

Rosepedal27

24 posts in 863 days


#2 posted 09-16-2017 03:23 AM

I downloaded this pattern but there are very few detailed instructions for the novice I am. What method did you use to cut out the dados on each of the rest pieces at that angle?
Pattie

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com