LumberJocks

Kitchen table for the boat.

  • Advertise with us
Project by matt5 posted 1281 days ago 1637 views 1 time favorited 9 comments Add to Favorites Watch

Another Compass Rose, but i get to keep this one. Its going in my boat. I used West system Marine epoxy to seal and glue down. Its Cherry, Walnut, Maple, poplar and red oak.

-- I've cut it twice, but its still to short....





9 comments so far

View matt5's profile

matt5

82 posts in 1289 days


#1 posted 1281 days ago

Oh, I forgot to say It is completed. I’ll get the finished pics here ASAP

-- I've cut it twice, but its still to short....

View MasterSergeant's profile

MasterSergeant

1278 posts in 1286 days


#2 posted 1281 days ago

nice work

-- Kelly, woodworker under construction

View Kate's profile

Kate

396 posts in 2472 days


#3 posted 1281 days ago

I like the design. Looking forward to seeing the finished piece.

-- Kate, http://www.wooden-box-maker.com

View Beginningwoodworker's profile

Beginningwoodworker

13337 posts in 2271 days


#4 posted 1281 days ago

Nice work!

-- CJIII Future cabinetmaker

View GaryL's profile

GaryL

1074 posts in 1428 days


#5 posted 1281 days ago

Very nice design. Can’t wait to see the finished table.
CNC cut I assume?

-- Gary; Marysville, MI...Involve your children in your projects as much as possible, the return is priceless.

View degoose's profile

degoose

6970 posts in 1952 days


#6 posted 1281 days ago

Looks like a good project to attempt with the TWC! Thanks for the idea…

-- Drink twice... and don't bother to cut... @ lazylarrywoodworks.com.au For lovers of all things timber...

View TMcG's profile

TMcG

182 posts in 1598 days


#7 posted 1281 days ago

Looks great, would love to see the finished item

-- http://wood.mcgivern.org

View BurningLizard's profile

BurningLizard

68 posts in 1289 days


#8 posted 1281 days ago

Wow that is quite a proses. Are you using a CNC router? I never have so I don’t have a clue what steps are involved.

View matt5's profile

matt5

82 posts in 1289 days


#9 posted 1280 days ago

I’m using a full blown CNC Mill from my shop where I build cylinderheads. Its a little over kill, but I dont have a router. I run a “climb mill” pattern to rough them out, to avoid splitting the wood, then do a .015 inch finish pass in a “conventional mill pattern” that leaves a part that dose not need sanding. Oak mills nicely, gum and maple….not so much, its to soft.

-- I've cut it twice, but its still to short....

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase