Torsion box assembly/outfeed table & crosscut sled for a new Grizzly G0715p(they seem to be getting pretty popular around here). I pretty much followed David Marks’ episode for the torsion box. It’s 4’x3’x5” skinned with some old pine dresser parts i had lying around. The cabinet base is 3/4” home depot birch ply on 4” casters. Rabbet & dado construction. BTW: My local HD was stocking pretty decent plywood marked made in USA & only $5 bucks more a sheet than the cheap chines stuff they usually stock. It was actually a pleasure to work with. Still have to trim out the edges. The crosscut sled is from the plywood scraps & will crosscut up to 20”. The fence is laminated MDF & bolted on. I plan to redo the fence once i get a 12/4 piece of hardwood.