LumberJocks

Charging Station

  • Advertise with us
Project by Bryan Herde posted 01-14-2011 06:22 AM 2755 views 20 times favorited 18 comments Add to Favorites Watch

I made a pair of these (his and hers kinda thing) but don’t have pictures of the other on yet. This was a plan from Wood Magazine. It was fun to make except the plans measurements were whacked but overall was a fun and very useful little project for my beginner skill level.

-- Bryan H





18 comments so far

View cajunpen's profile

cajunpen

14429 posts in 2814 days


#1 posted 01-14-2011 06:38 AM

Great job, your work and wood selections are perfect.

-- Bill - "Suit yourself and let the rest be pleased." http://www.cajunpen.com/

View Tom Goodman's profile

Tom Goodman

197 posts in 2880 days


#2 posted 01-14-2011 06:57 AM

This is one of the better charging stations I’ve seen. Thanks for posting.

And Welcome to Lumber Jocks.

-- - " If you want square work, You don't cut corners. " - -- Tom Goodman, Santa Maria, CA. woodworkertom@gmail.com

View woodworm's profile

woodworm

14134 posts in 2339 days


#3 posted 01-14-2011 07:03 AM

Beautifully made CS. Keep it up!

-- masrol, kuala lumpur, MY.

View Jamie Speirs's profile

Jamie Speirs

4163 posts in 1605 days


#4 posted 01-14-2011 09:42 AM

Nicely done.

It is a great idea, I need to make one for our collection.

What magazine was it in?

jamie

-- Who is the happiest of men? He who values the merits of others, and in their pleasure takes joy, even as though 'twere his own. --Johann Wolfgang von Goethe

View CampD's profile

CampD

1216 posts in 2234 days


#5 posted 01-14-2011 03:12 PM

Nice choice of woods, and very usefull.

-- Doug...

View Time2beupinAZ's profile

Time2beupinAZ

452 posts in 1710 days


#6 posted 01-14-2011 03:21 PM

That is very nice looking. Great job there.

-- Tim - I usally measure twice after I cut......then I know for sure that I cut it short.....

View Grant Davis's profile

Grant Davis

654 posts in 2657 days


#7 posted 01-14-2011 03:33 PM

Very nice, Love the flip down front.

-- Grant...."GO BUCKEYES"

View 58j35bonanza's profile

58j35bonanza

392 posts in 1441 days


#8 posted 01-14-2011 03:52 PM

You could send the other one to me! Really nice job. What type of finish did you use?

-- Chuck

View ratchet's profile

ratchet

1304 posts in 2535 days


#9 posted 01-14-2011 05:16 PM

Very nice project. Fav’d for future build.
Thx for sharing it with us!

View Beginningwoodworker's profile

Beginningwoodworker

13347 posts in 2421 days


#10 posted 01-14-2011 05:22 PM

Nice job!

-- CJIII Future cabinetmaker

View northwoodsman's profile

northwoodsman

237 posts in 2495 days


#11 posted 01-14-2011 08:23 PM

Bryan,

Nice Job! I built a couple of these 2 years ago. I think the plan was in Woodsmith. You are right about the measurements. I changed the dimensions a bit after the first one to accomodate the power strips that I could find and also for the chargers so they fit better. I like your choice of wood and the grain/pattern of it. I have had many people ask where they could buy these.

-- NorthWoodsMan

View Diggerjacks's profile

Diggerjacks

1784 posts in 1887 days


#12 posted 01-14-2011 08:54 PM

Good job
Good choice of wood

Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View Skylark53's profile

Skylark53

2565 posts in 1809 days


#13 posted 01-14-2011 09:20 PM

Nice job on a good, practical project.

-- Rick, Tennessee, John 3:16

View Bryan Herde's profile

Bryan Herde

18 posts in 1438 days


#14 posted 01-14-2011 10:18 PM

Thanks for the compliments everyone. Yes I was mistaken about the magazine, it was from Woodsmith Magazine and will say if you build this from there plans double check all measurements. For me, the walnut and ash fit together nicely and I have used this combination a couple of times before. I really like ash and have a local guy that I get it pretty cheap from, maybe that’s why I like it so much. It goes good with cherry as well. As for the finish I just used a satin wipe on poly from Minwax. Thank you again to everyone.

P.S.
I am a Fallout game fan and have spent far to much time on that crazy game

-- Bryan H

View Xodus's profile

Xodus

94 posts in 1871 days


#15 posted 01-15-2011 12:13 AM

Great looking project, which issues of woodsmith was it out of?

Welcome to Lumberjocks, hope you’re ready for what I call Lumberjocks Addiction :)

showing 1 through 15 of 18 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase