| Project by SASmith | posted 01-13-2011 02:30 AM | 2492 views | 8 times favorited | 6 comments |  |
 |
Pic 1: constructed using the same methods as the chevron board just not flipped 14”x20”x2”
Pic 2: the ever popular chevron 14”x20”x2”
Pic 3: bookmatched endgrain 15”x20”x2”
Pic 4: hexagon similar to this lazy susan: http://lumberjocks.com/projects/41991 ~13”x 1 1/4”
Pic 5: a simple striped board 12”x17”x1 5/8”
Pic 6: a table full of simple boards
All boards were completed in time for christmas, but I have just found the time to post them here. Thanks for looking.
Scott
-- Scott Smith, Southern Illinois
6 comments so far
Ken90712
home | projects | blog
17455 posts in 2945 days
#1 posted 01-13-2011 02:33 AM
Nice job on them. I like the end grain one the best, they hold up so much better with heavy use. 2 of mine were late due to all the rain here the finish took longer to set up. Nice work.
-- Ken, "Everyday above ground is a good day!"
SPalm
home | projects | blog
5300 posts in 3638 days
#2 posted 01-13-2011 05:01 AM
Yo Scott, cranking ‘em out.
That’s a lot of boards. Good for you.
Love the Chevron. I never tire of it. And the rest ain’t shabby either.
Steve
-- -- I'm no rocket surgeon
SteveW
home | projects | blog
394 posts in 2615 days
#3 posted 01-13-2011 05:52 AM
Nice looking work there,
I’m trying to get a handle on what these would go for?
would you private email me ballpark figures for their prices?
thanks!
-- On the eighth day God was back in His woodworking shop! SteveW
EzJack
home | projects | blog
456 posts in 2927 days
#4 posted 01-13-2011 11:13 AM
I would also like to know what you can get for them. Thanks
-- Ain't better or worse than any other woodpecker in the woods.
degoose
home | projects | blog
7216 posts in 3111 days
#5 posted 01-13-2011 12:02 PM
Hey you should get a reasonable return for you effort… these are extremely well done.
-- Don't drink and use power tools @ lasercreationsbylarry.com.au
dean2336
home | projects | blog
238 posts in 2665 days
#6 posted 01-17-2011 05:39 PM
how did you make this design? i like it alot and would like to make this.i sent a message but i wasn’t too clear thank you Dean
-- dean2336,nebr.
Have your say...