LumberJocks

Some wooden jewelry I finished

  • Advertise with us
Project by Pete Jansen posted 1338 days ago 1279 views 1 time favorited 6 comments Add to Favorites Watch

These are photos of some jewelry I finished for my wife for Christmas.
I’d like to take the credit for the glue up but I can’t. I was poking around
my local Woodcraft money pit and came across this design in a pen plank.
With limited time before Christmas I decided to resaw the blank and cut
some jewelry patterns out of them. This my friend is way harder than you
think. I have the blistered and bloody finger tips to prove it. Cutting, sanding
and finishing these babies is very hard on the fingers and took days to
get right. I think they came out very well and she loves them. That’s all
that really matters anyway.

-- Lovin' sawdust in beautiful Fort Collins, Colorado





6 comments so far

View Jonathan's profile

Jonathan

2605 posts in 1687 days


#1 posted 1338 days ago

Ah, yes, something to go in the bandsaw box!

I like your idea of using the pen blank for the intricacies involved here.

Any pointers for someone thinking about using your idea here (aka: things you’d do differently next time)?

Glad to hear they were well received.

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View Pete Jansen's profile

Pete Jansen

250 posts in 1557 days


#2 posted 1338 days ago

Jonathan, I hand sanded the small pieces on a flat surface with sandpaper face up on it.
I started with 80 grit until the pattern came through on the sides. I cut the pieces
large so I could sand them to size and not mess up the pattern.
I used 150 grit paper after that and finished them off by rubbing all the sides of
the jewelry on a foam 220 grit sanding block with great results. The foam block
cleaned up the edges nicely and polished the surfaces. I sealed the jewelry
with rub on cutting board finish as not to mess up my work thus far on Christmas eve.
I think I would spray finish on the next batch by hanging the pieces from a straight
section of fishing line pulled tight. I think a little more shine would be nice. It looks
good this way too, I don’t know. I have some other types of exotics that I will try out.
It was fun to make jewelry and I will continue to do it. It just tears up your fingers
holding on to it while sanding.

-- Lovin' sawdust in beautiful Fort Collins, Colorado

View toolferone's profile

toolferone

55 posts in 1462 days


#3 posted 1338 days ago

Looks very cool, great idea.

Could you make a little block wth double sided tape to help your fingers out.

-- Tom, http://www.dreamshopwoodworks.com

View Jonathan's profile

Jonathan

2605 posts in 1687 days


#4 posted 1338 days ago

I hear you on the tearing up of fingers. I didn’t actually tear mine up on the pendant I made for my wife, but did shave off a bit if fingernail unknowingly when working on the ebony pull for my first bandsaw box.

I’ll be curious to see what other pieces you come up with from the exotics you’ve got right now. I’m also considering other jewelry pieces, maybe a bit down the road once I get a few other things done.

-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."

View Pete Jansen's profile

Pete Jansen

250 posts in 1557 days


#5 posted 1338 days ago

You could make a sticky block but you turn and flip the pieces so many times and so quickly, it would just slow the process down too much. I may try some thin mechanics cloves like the ones they sell at the big orange store next time. As long as you can get a hold of the small pieces it would work.

-- Lovin' sawdust in beautiful Fort Collins, Colorado

View clieb91's profile

clieb91

3270 posts in 2571 days


#6 posted 1337 days ago

These came out really nice. I like the idea of using the pen blanks, and want to try some different glue ups. The ones I made this year made primarily from bottle stopper blanks. I may have to take a look at the pen blanks as well.
I found the best way to finish them was hanging them from ornament hooks and then a spray finish. As to the sanding and fingers I had remembered someone reccomending flex tape for finger tips when doing close sanding. I am awaiting some from Lee Valley. Let you know how it works to keep a grip and protect the finger tips.

CtL

-- Chris L. "Don't Dream it, Be it."- PortablePastimes.com (Purveyors of Portable Fun and Fidgets)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase