LumberJocks

Small Cherry Wall Cabinet

  • Advertise with us
Project by TominTexas posted 1313 days ago 2138 views 0 times favorited 8 comments Add to Favorites Watch

This is a small cherry wall cabinet that I recently completed. The dentil trim is composed of maple and walnut with the rest of the cabinet in cherry. It’s approximately 25” in height x 12” wide x 5” deep and is designed to attach to the wall with a french cleat.

The finish is Tru Oil. Thanks for looking.

Tom

-- East Side of Big D





8 comments so far

View TomFran's profile

TomFran

2940 posts in 2597 days


#1 posted 1313 days ago

Great looking cabinet and the craftsmanship looks excellent too!

-- Tom, Surfside Beach, SC - Romans 8:28

View SPalm's profile

SPalm

4760 posts in 2484 days


#2 posted 1313 days ago

Oh yea. I am liking this one.
Fantastic job,
Steve

-- -- I'm no rocket surgeon

View toolferone's profile

toolferone

55 posts in 1428 days


#3 posted 1313 days ago

I like Tru Oil on cherry. Does the cabinet have a purpose? Is that a ship lap back, would like to see a close up pic if it is. Very nice cabinet out of my favorite wood.

-- Tom, http://www.dreamshopwoodworks.com

View NBeener's profile

NBeener

4806 posts in 1776 days


#4 posted 1313 days ago

Absolutely beautiful job.

Did you half lap … or T&G … or ? ... the back panels ??

Very, very nice !

Thanks for posting it !

-- -- Neil

View libraryman's profile

libraryman

39 posts in 2347 days


#5 posted 1313 days ago

A very nice job! I’ve got to make some myself, hope they turn out as good. I love working with cherry.

View Ken90712's profile

Ken90712

14821 posts in 1791 days


#6 posted 1313 days ago

Great work, nice lines and details…

-- Ken, "Everyday above ground is a good day!"

View YoungestSon's profile

YoungestSon

93 posts in 1659 days


#7 posted 1313 days ago

Very lovely cabinet. Good details and craftsmanship. Thanks for sharing.

-- Don - Rochester, NY

View TominTexas's profile

TominTexas

42 posts in 1439 days


#8 posted 1312 days ago

Thanks for the comments – to answer Neil’s question concerning the back – it’s a lapped joint with a bead cut to dress it up a bit. The bead for the back panels as well as the bead on the top molding was cut with a shop made scratch stock – simple tool that produces a pretty nice bead and is faster than setting up the router table!

Tom

-- East Side of Big D

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase