LumberJocks

Wall Niches

  • Advertise with us
Project by SgtVrooman posted 1338 days ago 1282 views 3 times favorited 11 comments Add to Favorites Watch
Wall Niches
Wall Niches No picture No picture No picture No picture No picture
Zoom Pictures

This is a set of two wall niches to display art or figures in the wall. I made this set for a coworker who gave me the dimensions to go by that would fit his wall space. They are to be painted to match his trim. It was my first attempt at making curved molding.





11 comments so far

View wseand's profile

wseand

2119 posts in 1666 days


#1 posted 1338 days ago

Nice job, they came out pretty damn good.

-- Bill - "Freedom flies in your heart like an Eagle" Audie Murphy

View Eagle1's profile

Eagle1

2066 posts in 1689 days


#2 posted 1338 days ago

Great job. I haven’t seen a wall niche in a long time.

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

View Ken90712's profile

Ken90712

14878 posts in 1813 days


#3 posted 1338 days ago

Nice work! Look great.

-- Ken, "Everyday above ground is a good day!"

View rance's profile

rance

4128 posts in 1784 days


#4 posted 1338 days ago

VERY nice design and finish. I hope you got paid for this.

-- Backer boards, stop blocks, build oversized, and never buy a hand plane--

View Geedubs's profile

Geedubs

143 posts in 1853 days


#5 posted 1337 days ago

Curious…how did you make the curved molding? They look great.

-- Todos los dias aprendemos algo nuevo.

View Chip's profile

Chip

1904 posts in 2716 days


#6 posted 1337 days ago

Great inspiration for all kinds of projects! These are just so fine. I know it has to happen but I hate hearing that these have to be painted, they look so beautiful just the way they are. Great job!

-- Better to say nothing and be thought the fool... then to speak and erase all doubt!

View SgtVrooman's profile

SgtVrooman

36 posts in 1991 days


#7 posted 1337 days ago

The curved molding was cut from a 7.5” wide board planed down to 1/2” thick. The radius’s were drawn with a compass and they were cut out. I then ran them over a round nose router bit on the table to make the groves. the edges of the molding are cut with a round over/beading bit. The direction of the grain on the large niche will show you the direction of the board that it was cut from.

View ND2ELK's profile

ND2ELK

13495 posts in 2398 days


#8 posted 1337 days ago

Very nicely done. Thanks for posting.

God Bless
tom

-- Mc Bridge Cabinets, Iowa

View Monty Queen's profile

Monty Queen

1585 posts in 1876 days


#9 posted 1337 days ago

Awesome job Looks Fantastic.

Whoa.

-- Monty Q, Columbia, South Carolina.

View MsDebbieP's profile

MsDebbieP

18615 posts in 2785 days


#10 posted 1337 days ago

what a wonderful idea – and a job well done.
I like!

-- ~ Debbie, Canada (https://www.facebook.com/DebbiePribeleENJOConsultant)

View ratchet's profile

ratchet

1285 posts in 2411 days


#11 posted 1336 days ago

Very skilled execution! Once installed I’m sure these are going to look 1st rate.
Thanks for sharing your work with us.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase