Breadboard for dipping

  • Advertise with us
Project by AstroGuy posted 1319 days ago 1532 views 3 times favorited 3 comments Add to Favorites Watch
Breadboard for dipping
Breadboard for dipping No picture No picture No picture No picture No picture
Zoom Pictures

This is a breadboard created in Vectric Aspire and then cut on my CNC. It’s a modification of the design created by Tim Merrill over at the Vectric Aspire forum (Thanks Tim!). The carving was cleaned up using scrapers and a Dremel tool. The wood is Lyptus that had an almost pink hue and the finish is just good old mineral oil.

-- Richard

3 comments so far

View Jim Jakosh's profile

Jim Jakosh

11099 posts in 1709 days

#1 posted 1319 days ago

Very cool. With a CNC machine you can knock a lot of the out quick!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Robsshop's profile


807 posts in 1579 days

#2 posted 1319 days ago

I will take 25 pronto !! After all it is Christmas time and I got a lot of gifts to hand out . That CNC must come in handy this time of year ! Green with envoy .

-- Rob,Gaithersburg,MD,One mans trash is another mans repurposed wood shop treasure ! ;-)

View AstroGuy's profile


57 posts in 2648 days

#3 posted 1318 days ago

Lol…yes, the cnc is fun and great for gifting. Works better, though, if you have 25 friends who all want the same gift….

-- Richard

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase