Cutting board holder

  • Advertise with us
Project by WoodenSoldier posted 12-09-2010 04:30 AM 3586 views 4 times favorited 13 comments Add to Favorites Watch

I liked my last cutting board so much I decided to make it a wall piece so that it’s on display while not in use. Just a quick little rack I made out of walnut scrap and finished with 3 coats of wipe-on poly.

-- Create something everyday.

13 comments so far

View a1Jim's profile


113836 posts in 2669 days

#1 posted 12-09-2010 04:35 AM

Good Idea nice job

-- Custom furniture

View Grantman's profile


106 posts in 3117 days

#2 posted 12-09-2010 04:45 AM

Awesomely cool. Can you share the pattern cuts for the board itself?

Curious as to why you used poly as opposed to mineral oil, walnut oil, or other penetrating oils. Won’t any cuts you make on the board degrade the poly?

View Robsshop's profile


894 posts in 2067 days

#3 posted 12-09-2010 05:54 AM

Great, now not only do I have to make a cutting board to be considered an official LJ member, now I have to make this handy display shelf as well ! (LOL). kidding aside, beautiful board and great work on the shelf. Thanks for the look and be safe.

-- Rob,Gaithersburg,MD,One mans trash is another mans wood shop treasure ! ;-)

View lanwater's profile


3105 posts in 2026 days

#4 posted 12-09-2010 08:54 AM

I like your board WoodenSoldier.

It looks like your previous but rearranged. I gives a great 3D perspective.

Grest job!

-- Abbas, Castro Valley, CA

View Ken90712's profile


16047 posts in 2281 days

#5 posted 12-09-2010 11:35 AM

Nice job on both.

-- Ken, "Everyday above ground is a good day!"

View Jim Jakosh's profile

Jim Jakosh

14432 posts in 2197 days

#6 posted 12-09-2010 01:35 PM

Beautiful cutting board and a great way to display it. It is so nice, I would not cut on it!!!!!!!

It is a real eye catcher!

Thanks for sharing. I have to make one of them some day! Like Rob said, it is almost like a requirement for LJ’s to make a cutting board. Nice work!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View patron's profile


13422 posts in 2433 days

#7 posted 12-09-2010 02:00 PM

great way to keep it off the counter
and out of the water
that can creep under them

keeps them flat

great board too

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View helluvawreck's profile


19547 posts in 1958 days

#8 posted 12-09-2010 02:27 PM

That’s a beautiful cutting board and a very clever rack. Good work.

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View deon's profile


2395 posts in 2117 days

#9 posted 12-09-2010 02:29 PM

Great work

-- Dreaming patterns

View SPalm's profile


5186 posts in 2974 days

#10 posted 12-09-2010 03:01 PM

Nice. What a good idea.
I think your board is upside down :-)


-- -- I'm no rocket surgeon

View Maveric777's profile


2692 posts in 2168 days

#11 posted 12-09-2010 03:36 PM

Now that is what I call “Designer Lumberjocks 101”.... Looks fantastic and what a nice decorative aspect to add to any kitchen. My bride displays our small one on our counter top as well. Think I may borrow a few design aspects off yours to make a free standing holder.

Good stuff!

-- Dan ~ Texarkana, Tx.

View Brad_Nailor's profile


2535 posts in 3049 days

#12 posted 12-10-2010 03:14 PM

Must be hard to chop veggies with it up on the wall like that?...

Nice board..


View kayakdude's profile


96 posts in 1868 days

#13 posted 03-01-2011 02:42 AM

thats way kool . i wish i can do that kind of stuff.

-- kayakdude

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics