LumberJocks

Candle plate

  • Advertise with us
Project by Tzweber posted 11-21-2018 03:18 AM 392 views 0 times favorited 3 comments Add to Favorites Watch
Candle plate
Candle plate No picture No picture No picture No picture No picture
Zoom Pictures

Still playing around with my lathe putting off larger projects since the shop is a mess and I just wanted to do a little woodworking. Turned a walnut version of this a couple days ago and tonight did one of a mystery piece of scrap I had laying around. Still glued to scrap so i can spray it with urethane while spinning. Makes for a nice even coat and easy buffing.





3 comments so far

View Jim Jakosh's profile

Jim Jakosh

21740 posts in 3308 days


#1 posted 11-21-2018 03:20 AM

Nice project. You cut a lot of air that way.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View ralbuck's profile

ralbuck

5417 posts in 2469 days


#2 posted 11-22-2018 01:08 AM

Should be very pretty; when totally finished.

-- Wood rescue is good for the environment and me! just rjR

View Tzweber's profile

Tzweber

28 posts in 81 days


#3 posted 11-22-2018 01:49 AM

Thanks guys. Wish I knew what species of wood it is. It is really dense and the grain is beautiful. I think I’ll try making a spoon with the rest of the chunk I cut that from. Yes it is a lot of air cutting doing these rectangular plates. It’s harder than I thought it would be to turn that very outside without chipping or chatter. If you’ve done any square turning I’d love to hear any tips you have.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com