Tapered Dovetailed Box

  • Advertise with us
Project by Don posted 11-20-2010 08:59 AM 1853 views 1 time favorited 8 comments Add to Favorites Watch

I made this box out of hickory last year when I bought my Delta Dovetail Omnijig
Finish is Shellac and wax.

-- Don - I wood work if I could. Redmond WA.

8 comments so far

View Ken90712's profile


17553 posts in 3117 days

#1 posted 11-20-2010 12:45 PM

Nice work. I like the angle and the way you mad the handle. Joints look nice and tight as well. Whats the inside look like?

-- Ken, "Everyday above ground is a good day!"

View Eagle1's profile


2066 posts in 2993 days

#2 posted 11-20-2010 02:32 PM

Nice box I really like Hickory.

-- Tim, Missouri ....Inside every older person is a younger person wondering what the heck happened

View helluvawreck's profile


30454 posts in 2795 days

#3 posted 11-20-2010 02:43 PM

That’s a very unusual box and I like it.

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Roger's profile


20916 posts in 2733 days

#4 posted 11-20-2010 02:56 PM

That came out very nice.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View Dennisgrosen's profile


10880 posts in 3044 days

#5 posted 11-20-2010 03:54 PM

niice work Don ainĀ“t bad at all


View Don's profile


517 posts in 3002 days

#6 posted 11-21-2010 07:30 AM

Thanks everyone!

Ken, the inside looks empty. ;)
I’ll get a picture of it with the lid off when I get a chance and upload it.

-- Don - I wood work if I could. Redmond WA.

View bigike's profile


4053 posts in 3217 days

#7 posted 01-02-2011 06:21 PM

very nice box, i’m scared to try angled dovetails on my leigh jig. I will someday.

-- Ike, Big Daddies Woodshop,

View Don's profile


517 posts in 3002 days

#8 posted 01-02-2011 07:11 PM

Thanks Ike, it really wasn’t any harder to do, it just took some trial and error to figure out how to position the boards on the jig. Once I figured that out everything else was the same. To do this you just have to work in the middle of the jig rather than on an end so that the boards have room on both the left and right sides.

-- Don - I wood work if I could. Redmond WA.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics