LumberJocks

Assorted Sizes Multi-Tier Platn Stands

  • Advertise with us
Project by Paul Bucalo posted 11-04-2018 02:31 PM 277 views 0 times favorited 6 comments Add to Favorites Watch

These were made over the summer for a local event in one of our center parks that ran each Saturday from September 15th through October 20. The second and third images are of the larger sized units. The second of that group is the largest.

Image #1
Small, poplar, Kona stained base, poly overcoat.

Image #2
Large, red oak slats, pine base, Danish oil, poly overcoat

Image #3
X-Large, red oak slats, white oak base with organic stain—Beechnut Gray, poly overcoat.

Image #4
Small, red oak, poly overcoat.

Image #5
Small, red oak, poly overcoat.

-- Paul, Upstate New York, USA





6 comments so far

View luv2learn's profile

luv2learn

2867 posts in 2476 days


#1 posted 11-04-2018 03:31 PM

Very unique design Paul and mobile too. Well done!!

-- Lee - Northern idaho~"If the women don't find you handsome, at least they ought to find you handy"~ Red Green

View majuvla's profile

majuvla

13220 posts in 3041 days


#2 posted 11-04-2018 04:03 PM

Interesting concept.

-- Ivan, Croatia, Wooddicted

View ralbuck's profile

ralbuck

5274 posts in 2440 days


#3 posted 11-04-2018 04:59 PM

Made to be on a deck and enhance the look of the plants and the deck too.

-- Wood rescue is good for the environment and me! just rjR

View Paul Bucalo's profile

Paul Bucalo

688 posts in 1533 days


#4 posted 11-04-2018 07:34 PM


Very unique design Paul and mobile too. Well done!!

- luv2learn

Thanks. I built one of these a couple of years ago and posted that one here. It made the Daily win. The basis for the design is in the use of pallet runners for the chassis or frame, and pallet slats for the top sections. Surprisingly, everyone who commented on these at the local show either didn’t know what it was used for or thought it was a foot rest. To the latter, I said “sure, if that’s what you want it for.” Make it your own.

-- Paul, Upstate New York, USA

View Paul Bucalo's profile

Paul Bucalo

688 posts in 1533 days


#5 posted 11-04-2018 07:34 PM



Interesting concept.

- majuvla

Based on the shape on the runners and slats used in pallets!

-- Paul, Upstate New York, USA

View Paul Bucalo's profile

Paul Bucalo

688 posts in 1533 days


#6 posted 11-04-2018 07:37 PM



Made to be on a deck and enhance the look of the plants and the deck too.

- ralbuck

These weren’t made to be outdoor proof, on purpose, but they will take some protected outdoors and inside porch well. I found out the hard way that no polyurethane or deck finish will take a 6-8 months in the sun and weather without degrading. I should post what my orignal looks like now, after two years in the weather, no finosh whatsoever. Black and gray. Not bad, considering it’s white oak.

-- Paul, Upstate New York, USA

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com