or Join Now!
Made from an assortment of hardwoods including oak, maple, hickory, bloodwood, purpleheart mahogany and walnut, finished with butcherblock oil. It is 12” X 10” and 1 1/8” thick. No pattern to it, just as things fell together.
home | projects | blog
114 posts in 2571 days
Preview this project card
760 posts in 2927 days
#1 posted 11-15-2010 05:59 PM
Cool! that glue up must have been fun. How did you do it?
-- The secret to getting ahead is getting started.
763 posts in 3022 days
#2 posted 11-15-2010 06:00 PM
Nice use for leftovers , well done. Thanks for sharing with us.
-- Not my woodworking http://woodworkessence.com/
706 posts in 2454 days
#3 posted 11-15-2010 07:48 PM
Nice, kinda like a ‘crazy quilt’, visually both attractive and confusing!!
13347 posts in 3180 days
#4 posted 11-15-2010 08:14 PM
Nice end grain cutting board!
5265 posts in 3389 days
#5 posted 11-15-2010 10:13 PM
Cool. Good idea. And it looks great.
-- -- I'm no rocket surgeon
10635 posts in 3754 days
#6 posted 11-16-2010 12:04 AM
I MADE ONE THAT LOOKED LIKE THIS ONCE, ONLY IT LOOKED LIKE THIS AFTER I RUN IT THROUGH THE PLANER. NICE JOB. YOUR’S LOOKS BETTER.
-- (You just have to please the man in the Mirror) Mike from Michigan -
#7 posted 11-16-2010 01:35 AM
Cory, This was made up by gluing 7’ (or longer) pieces together till I had a square 2 1/2” that I could trim on my table saw and sand on my thickness sander (homemade), when I had 4 blocks 2 1/2 X 2 1/2 X 7, I cut them into 5 pieces, ran those through the sander, randomly glued into a board and finally ran it through my thickness sander again and again and this is what I ended up with.
109 posts in 2584 days
#8 posted 12-24-2010 10:16 PM
There will never be another one just like it. Nice job.
#9 posted 12-25-2010 12:02 AM
Glen, You can bet on that!
1093 posts in 2338 days
#10 posted 12-25-2010 01:00 AM
That looks great, like a crazy wooden quilt.
-- Gary; Marysville, MI...Involve your children in your projects as much as possible, the return is priceless.
Go to Pulse page »
©2017 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics