LumberJocks

Spalted Birch Goblet

  • Advertise with us
Project by D & E woodworks posted 1251 days ago 1056 views 0 times favorited 2 comments Add to Favorites Watch

I had a nice piece of spalted birch. I like making goblets because they are slightly more difficult than bowls. I turned the goblet down to a 3/8 diameter stem and the top and bottom are both about 2 and 5/8 inches in diameter. The bottom is about an eighth of an inch thick. I applied many coats of salad bowl finish to make it shine.





2 comments so far

View peteg's profile

peteg

2707 posts in 1324 days


#1 posted 1251 days ago

looks nicely balanced, like the detail under the neck, lovely finish

-- Pete G: If you always do what you always did you'll always get what you always got

View jockmike2's profile

jockmike2

10635 posts in 2747 days


#2 posted 1251 days ago

VERY NICE TURNING. I TOO LIKE THE UNIQUE DIFFERENCES YOU’VE MADE. VERY NICE GRAIN AND FINISH. YOU CAN TELL YOU TOOK YOUR TIME WITH THIS PIECE.

-- (You just have to please the man in the Mirror) Mike from Michigan -

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase