LumberJocks

Table saw sled

  • Advertise with us
Project by Erik van Baarle posted 1354 days ago 2772 views 4 times favorited 9 comments Add to Favorites Watch

I needed a sled cause i had a hard time cutting parts exacly in a 90° angle
This is what i made from it.
The front piece is adjustable so if it would ever get out alignment i can still set it back to 90°.

-- Erik, Merksem Belgium





9 comments so far

View GMman's profile

GMman

3902 posts in 2301 days


#1 posted 1354 days ago

Very nice sled

View Erik van Baarle's profile

Erik van Baarle

85 posts in 1473 days


#2 posted 1354 days ago

Thx, i like it a lot

-- Erik, Merksem Belgium

View Scott Bryan's profile

Scott Bryan

27251 posts in 2425 days


#3 posted 1354 days ago

Erik, this is certainly a nice looking sled that should improve your saw’s operation. This is one tool that, once I made it, I wondered why I did not make one sooner.

One suggestion I would have is to add some blocking on the rear fence just to be on the safe side and protect your fingers should the blade go through the rear fence.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

View Erik van Baarle's profile

Erik van Baarle

85 posts in 1473 days


#4 posted 1354 days ago

You are right about that, i will make a protection where the blades comes out.
Thx for reminding me
Greetings from Belgium
Erik

-- Erik, Merksem Belgium

View NBeener's profile

NBeener

4806 posts in 1777 days


#5 posted 1354 days ago

I also like simple, shop-made tools, jigs, and fixtures.

Very nice looking sled. I would say it has “very clean lines.”

I think it was very smart to build in adjustability.

It makes this a piece that you’ll work with for a long, long time.

-- -- Neil

View Erik van Baarle's profile

Erik van Baarle

85 posts in 1473 days


#6 posted 1354 days ago

I so will.
I like it simple.
Thx for the comment
Greetings from Belgium
Erik

-- Erik, Merksem Belgium

View Beeguy's profile

Beeguy

173 posts in 2239 days


#7 posted 1354 days ago

Very nice, and I too like the fact that it is adjustable.

-- Ron, Kutztown, PA "The reward is in the journey."

View Robsshop's profile

Robsshop

807 posts in 1578 days


#8 posted 1354 days ago

Great shop saw upgrade Erik,and You have made a good decision with a cross-cut sled if accuracy is what You are after. I do think You should add some safety features when You can(rear gaurd/Lexon sheilding) but over all nice project !

-- Rob,Gaithersburg,MD,One mans trash is another mans repurposed wood shop treasure ! ;-)

View Erik van Baarle's profile

Erik van Baarle

85 posts in 1473 days


#9 posted 1354 days ago

Thx for the nice comments guys, i will put on that safety where the blade comes out
Greetings from Belgium
Erik

-- Erik, Merksem Belgium

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase