LumberJocks

WS Semi Tractor #108

  • Advertise with us
Project by Jason1974 posted 10-25-2018 09:18 PM 755 views 0 times favorited 24 comments Add to Favorites Watch

Well I’m done with the tractor. I also built the lowboy to go with it. I turned the tyres, gas tanks, air tanks and the air filter canister on the lathe. I even made my own axle pegs too. The project was made out of walnut, oak and the tyres were made out of maple.

-- Jason, Camden, NC -- MEASURE TWICE, CUT ONCE, THEN FORCE IT TO FIT.





24 comments so far

View htl's profile

htl

4199 posts in 1335 days


#1 posted 10-25-2018 09:24 PM

Super nice job!!!
Really like the air cooled muffler covers.[Can’t think what you call them?]
I know what a pain they can be to set up.
Show us the bottom and I can’t wait to so the Low Boy I really love the looks of them.

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View GR8HUNTER's profile

GR8HUNTER

4930 posts in 889 days


#2 posted 10-25-2018 09:36 PM

I also love the heat shields on the stacks makes it look really nice ….good job on that turned stuff … will look great with lowboy and excavator GREAT JOB :<)))

-- Tony---- Reinholds,Pa.------ REMEMBER TO ALWAYS HAVE FUN

View LittleBlackDuck's profile

LittleBlackDuck

2050 posts in 997 days


#3 posted 10-25-2018 09:59 PM

Great job J’1974... those heat shields add that extra level of WOW detail…
The “half shields”... interested in the reasoning behind that… were you too lazy to make 2? Are they that thin or is the thickness hidden by a “stained kerf” on the top?
How many vent holes per perimeter (looks like 6)... I am contemplating making a drilling jig for the shields. You threatened a blog on the shields... has Captain America gone AWOL?

Did you stain the kerfs in the tanks and filter or wire burn… looks good.

-- If your first cut is too short... Take the second cut from the longer end... LBD

View Jason1974's profile

Jason1974

102 posts in 499 days


#4 posted 10-25-2018 10:30 PM

That my friend is wire burn. I think it makes the detail really pop!

-- Jason, Camden, NC -- MEASURE TWICE, CUT ONCE, THEN FORCE IT TO FIT.

View mudflap4869's profile

mudflap4869

1867 posts in 1635 days


#5 posted 10-25-2018 10:31 PM

SUPER RAD! I am envious of your talent.

-- Still trying to master kindling making

View Jason1974's profile

Jason1974

102 posts in 499 days


#6 posted 10-25-2018 10:34 PM

-- Jason, Camden, NC -- MEASURE TWICE, CUT ONCE, THEN FORCE IT TO FIT.

View htl's profile

htl

4199 posts in 1335 days


#7 posted 10-25-2018 10:49 PM

Thanks Jason!!!
Love it when the underneath is as pretty as the top.

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View sras's profile

sras

4923 posts in 3305 days


#8 posted 10-25-2018 11:31 PM

Very nice!

-- Steve - Impatience is Expensive

View Redoak49's profile

Redoak49

3605 posts in 2165 days


#9 posted 10-25-2018 11:34 PM

Well done….Excellent

View recycle1943's profile

recycle1943

2439 posts in 1798 days


#10 posted 10-25-2018 11:54 PM

Way, way nice.

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Underdog's profile

Underdog

1207 posts in 2212 days


#11 posted 10-26-2018 01:36 AM

Really good job! I appreciate a well done vehicular model. I also applaud your hand turned items. Well done. I’m with you all the way on that. I don’t want to buy my round stuff. I wanna turn it myself!

-- Jim, Georgia, USA

View ralbuck's profile

ralbuck

5293 posts in 2443 days


#12 posted 10-26-2018 02:03 AM

Very realistic.

Almost all males and a lot of females too would love that toy! From about 3 years old to 90+.

-- Wood rescue is good for the environment and me! just rjR

View Dutchy's profile

Dutchy

3126 posts in 2345 days


#13 posted 10-26-2018 02:30 AM

A daily TOP 3 a few hours after posting. What can I say? I like it, the colers and also the detail. The heatshields turned out well, the question is how.

-- https://dutchypatterns.com/

View htl's profile

htl

4199 posts in 1335 days


#14 posted 10-26-2018 02:59 AM


The heatshields turned out well, the question is how.

- Dutchy

We need a how2,!! We need a how2!!! LOL

#4 over and out!!!

-- An Index Of My Model making Blogs http://lumberjocks.com/htl/blog/116729

View Rick S...'s profile

Rick S...

10782 posts in 3209 days


#15 posted 10-26-2018 03:00 AM

Very Nice Project Jimmy & Well Done!

-- It is not necessary for Some People to turn OFF the LIGHT to be IN the DARK! (Ontario, CANADA)

showing 1 through 15 of 24 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com