LumberJocks Woodworking Forum banner

Project Information

I made this box out of a 4 X 4 piece of cedar. First, I started out by going on the internet to find a 30 logo. Second, I printed it out and traced it on the 4 X 4 piece of cedar. Third, I started cutting the 30 out on the band saw. Once I was all done cutting it out I sanded it down until all of it was pretty smooth. The last thing I did was put a clear coat stain on it. Then I let it dry for a couple of days. When it was dry i put a final clear coat stain on it and waited a couple of more days to let it dry completely.

Gallery

Comments

· Registered
Joined
·
247 Posts
Hello Gmill30

An interesting design for your band saw box
 

· Registered
Joined
·
4 Posts
MY SON & I ARE IN THE MIDDLE OF MAKING OUR FIRST BAND SAW BOX, LOTS OF FUN.
A NICE WAY TO HONE THE SKILLS
 
Top