LumberJocks

Candle Holder

  • Advertise with us
Project by FloridaArt posted 1388 days ago 1197 views 2 times favorited 3 comments Add to Favorites Watch

October, 2010—This was made on the band saw. I sandwiched some hardwood left-overs in between two slabs of pine. Then the bottom was sliced off so the hole for the candle could be cut out. Then the bottom is glued back on. If you look carefully at the main photo you can see where I cut in with the band saw to cut out the circle.

I used the roundover bit in the router on the top and bottom. This is sanded down to 220, and stained with a Minwax oil-based stain. After that dried, I applied a spray lacquer gloss.

The scented candle came from Lowe’s and cost $1.98 each. This was a quick, fun project. I should get busy and make a bunch of these for holiday gifts!

-- Art | Bradenton, Florida





3 comments so far

View gary351's profile

gary351

96 posts in 1428 days


#1 posted 1388 days ago

Looks good, i think potpourri would work well with all those different woods.

-- A poor man has poor way's

View donjoe's profile

donjoe

1360 posts in 1663 days


#2 posted 1388 days ago

Yep. Make a bunch and hand them out for the holidays.

-- Donnie-- listen to the wood.

View Loucarb's profile

Loucarb

2388 posts in 2077 days


#3 posted 1388 days ago

Another nice piece.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase