LumberJocks

Hearts are Trump

  • Advertise with us
Project by mustanger posted 09-17-2018 01:54 PM 694 views 1 time favorited 7 comments Add to Favorites Watch
Hearts are Trump
Hearts are Trump No picture No picture No picture No picture No picture
Zoom Pictures

No political reference intended.

Woods: PurpleHEART and YellowHEART.

Backer: Black Enameled Hardboard.

Frame: Poplar.

Finish: Satin Polyurethane.

-- Third Armored Division - Spearhead





7 comments so far

View Phil32's profile

Phil32

92 posts in 47 days


#1 posted 09-17-2018 03:55 PM

That’s a challenging design, Mustanger, and you have done it well!
Phil

-- Phil Allin - Ventura, CA

View recycle1943's profile

recycle1943

2303 posts in 1766 days


#2 posted 09-17-2018 11:18 PM

Real nice – care to share dimensions
Trying to figure out how you weave clamp & glue

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View mustanger's profile

mustanger

24 posts in 284 days


#3 posted 09-18-2018 01:42 AM

Recycle1943, Dick, I would be more than happy to share. The angles are 45 and 60. The pieces are 1.5 in. wide. The blank areas are .75 x .75. From end to end (YH to YH or PH to PH) it is 10.25 in. Everything is skewed to 30 degrees. I use Titebond Quick and Thick and start with that middle YH rectangle which is 1.5 wide and 3 long. Glue it down making sure it is exactly at 30 degrees, weigh it down (no clamps) and let it set up. I cut a few .75 x .75 spacers to keep the symmetry – then I attach the 2 long PH pieces to the center YH where all center lines touch. There are only four different pieces to cut and the similar ones are all the same size. The “key” is the .75 x .75 spacing. If you maintain that, then it’s nothing more than gluing up a puzzle. Hope I’m clear, but if not, don’t hesitate to message.

-- Third Armored Division - Spearhead

View recycle1943's profile

recycle1943

2303 posts in 1766 days


#4 posted 09-18-2018 02:09 AM

Way more info than I need – definitely not going to replicate, was just curious about the glueing. I’m guessing the strips are 1/4” or less thick ?

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Peteybadboy's profile

Peteybadboy

463 posts in 2093 days


#5 posted 09-18-2018 09:57 AM

I like it!

-- Petey

View helluvawreck's profile

helluvawreck

32083 posts in 3010 days


#6 posted 09-18-2018 11:53 AM

This is a beautiful project. Nice work!

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View mcoyfrog's profile

mcoyfrog

4487 posts in 3738 days


#7 posted 10-03-2018 08:21 PM

Sweet

-- Wood and Glass they kick (well you know) Have a great day - Dug

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com