LumberJocks

Makeup mirror with LED light

  • Advertise with us
Project by WoodenWorldDenic posted 09-04-2018 11:11 AM 578 views 0 times favorited 2 comments Add to Favorites Watch

Task: How to make a cheap makeup mirror with a backlight. For the solution of this task, I used
a 33 cm diameter plastic serving tray, 31 cm diameter mirror, 8 mm and 18 mm plywood. For lighting, I used a LED strip, with a power of about 12 W / meter, a suitable power supply and a cable with a switch. It is also possible to install dimmable diodes instead of ordinary and adjust the brightness. The makeup mirror support is made so that it can be used on the table, or it can be mounted on the wall.

-- http://www.WoodenWorlDenic.com; https://www.youtube.com/channel/UCIdP7-IdkxGyrcXl8dzPRRw





2 comments so far

View robscastle's profile

robscastle

5246 posts in 2322 days


#1 posted 09-04-2018 10:48 PM

Hello Denic,

Dont forget when you build these projects to add a story of how it was made meaning materials used, where you obtained them from, and all that sort of detail, much the same as you did on your other project posts.
Otherwise great effort on the design build and subsequent pictures and video.
Nice story on your home page too!

-- Regards Rob

View WoodenWorldDenic's profile

WoodenWorldDenic

85 posts in 3124 days


#2 posted 09-05-2018 09:15 AM

Thank you Rob. Look at the topic “How I made #8: Makeup mirror with LED light”

-- http://www.WoodenWorlDenic.com; https://www.youtube.com/channel/UCIdP7-IdkxGyrcXl8dzPRRw

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com