LumberJocks

Walnut Waterfall table

  • Advertise with us
Project by LoganN posted 09-01-2018 02:26 AM 916 views 4 times favorited 13 comments Add to Favorites Watch

This is a beautiful walnut slab I bought and decided to make into a waterfall table to try and sell at an art show I set up at. I didn’t sell it, but I did take best in category, so that was nice too!
The base and bow ties are padauk and the white epoxy is called apoxie – I’ve posted about it before. I usually use black, but decided to go bolder this time. I decided on the border around the bow ties after they were already done and the table was almost finished, which was more than a little nerve-wracking!! lol
The finish is Danish oil and wipe-on poly





13 comments so far

View woodbutcherbynight's profile

woodbutcherbynight

5545 posts in 2528 days


#1 posted 09-01-2018 03:24 AM

Beautiful table!!!

-- Live to tell the stories, they sound better that way.

View BurlyBob's profile

BurlyBob

5897 posts in 2385 days


#2 posted 09-01-2018 05:12 AM

Wow! That is absolutely stunning. You really made a table to be very proud of. Good for You.

View majuvla's profile

majuvla

12881 posts in 2987 days


#3 posted 09-01-2018 07:37 AM

This walnut wood as well as table itself look hell good!! I like those butterfly patches too.

-- Ivan, Croatia, Wooddicted

View MJR's profile

MJR

147 posts in 534 days


#4 posted 09-01-2018 10:33 AM

That is Sharp! Nice job an the grain matching and bow-ties, Is Apoxie an adhesive epoxy? And does it come in colors or just white and you add color?

View Peteybadboy's profile

Peteybadboy

420 posts in 2069 days


#5 posted 09-01-2018 10:59 AM

Beautiful. Could you share how you did the bow ties?

-- Petey

View Andrek's profile

Andrek

400 posts in 2029 days


#6 posted 09-01-2018 11:12 AM

This is absolutely fantastic, very well done, walnut is a special wood and you did a special job, bravo.

-- andrek

View LoganN's profile

LoganN

428 posts in 2020 days


#7 posted 09-01-2018 01:00 PM

Thanks all!
MJR – apoxie is a 2 part putty epoxy. It mixes up and has the consistency of play-doh. I just put on gloves and mix it like I’m making snakes with my kids and then push it in to cracks with a putty knife. Smooth it out and your good. It comes in a bunch of colors- look it up on amazon

Peteybadboy – I hand cut the bow ties and inlaid them with a chisel and forstner bit and was almost done with the table when I decided that they needed more pop, so I used a set of chisels to carve out the area. Honestly it was nerve-wracking, but I took my time and just eye balled my sizes. I did try to use bigger chisels to keep the lines straighter, but that’s it. Afterwards I added the apoxie and cleaned it up.

View MJR's profile

MJR

147 posts in 534 days


#8 posted 09-02-2018 08:18 AM



Thanks all!
MJR – apoxie is a 2 part putty epoxy. It mixes up and has the consistency of play-doh. I just put on gloves and mix it like I’m making snakes with my kids and then push it in to cracks with a putty knife. Smooth it out and your good. It comes in a bunch of colors- look it up on amazon

Peteybadboy – I hand cut the bow ties and inlaid them with a chisel and forstner bit and was almost done with the table when I decided that they needed more pop, so I used a set of chisels to carve out the area. Honestly it was nerve-wracking, but I took my time and just eye balled my sizes. I did try to use bigger chisels to keep the lines straighter, but that’s it. Afterwards I added the apoxie and cleaned it up.

- LoganN


Awesome

View pottz's profile

pottz

2980 posts in 1104 days


#9 posted 09-03-2018 01:51 AM

logan what can i say but gorgeous my friend,your work just keeps getting better with every post.once again a home run buddy.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View LoganN's profile

LoganN

428 posts in 2020 days


#10 posted 09-03-2018 05:19 PM

Pottz- thanks bud! Still not holding a candle to your stuff!

View swirt's profile

swirt

3047 posts in 3091 days


#11 posted 09-04-2018 01:15 AM

Wow. Great looking wood and a great table from it. Nice choice on the white epoxy. A less common choice, but it looks great.

-- Galootish log blog, http://www.timberframe-tools.com

View TimberAndAshDesigns's profile

TimberAndAshDesigns

33 posts in 82 days


#12 posted 09-04-2018 02:04 PM

Very Nice!

-- I live on caffeine, sawdust and swear words. https://timberandashdesigns.com/

View mcoyfrog's profile

mcoyfrog

4389 posts in 3714 days


#13 posted 09-04-2018 02:22 PM

I love these fold/wrap type tables really kewl

-- Wood and Glass they kick (well you know) Have a great day - Dug

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com