LumberJocks

Birch Plywood Cornhole Game

  • Advertise with us
Project by ornateInventions posted 08-25-2018 05:50 AM 457 views 1 time favorited 2 comments Add to Favorites Watch

Used every tool in the shop to produce these puppies!

What seemed like an easy to make project actually turned out to be quite tedious. I used gorilla glue to hold everything together. I didn’t want to risk splitting any plywood with nails, and couldn’t see screws adding any real structural strength. I made the holes with a jig saw with tape on the plywood to prevent tear out.

The legs swing up and are held by a 3/4 inch bolt with a washer and nut.

Originally the bottom was not 3 inches in height from the ground, so I had to trim it down to fit the correct dimensions of 3 inches at the bottom and 12 inches in height at the top. But it ended up adding a unique design feature to the sides.

Leaving it up to another to do the paint job!

130

-- "Here am I, send me" - The True Craftsman





2 comments so far

View mel52's profile

mel52

559 posts in 437 days


#1 posted 08-25-2018 05:01 PM

Getting ready to make a set for my son-in-law. May have to use your ideas…..

-- MEL, Kansas

View trainrunner's profile

trainrunner

122 posts in 2071 days


#2 posted 08-28-2018 06:01 AM

Looking good thanks for sharing

-- Work- helping fill out my workshop but giving me no time to use my toys.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com