or Join Now!
Lots of nice clamps out there on the market. Sometimes its nice to make your own. The first one is made out of threaded pipe and I have used this for small glue ups. The second one I used for gluing up 15 drawers for my cabinets.
home | projects | blog
39 posts in 2078 days
Preview this project card
4995 posts in 2044 days
#1 posted 10-24-2010 04:42 AM
Now that is a clamp and expandable also
1358 posts in 2089 days
#2 posted 10-24-2010 05:36 AM
great idea, might have to pinch it.
-- Theresa, https://sites.google.com/site/tmj65treasure/
113725 posts in 2617 days
#3 posted 10-24-2010 05:40 AM
-- http://artisticwoodstudio.com Custom furniture
342 posts in 1872 days
#4 posted 10-24-2010 06:14 AM
would be kinda annoying to move the nuts around since you can’t put a drill on it, but w/e. ill prob end up using this at least once.
-- Ben L
1924 posts in 2178 days
#5 posted 10-24-2010 10:44 AM
-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit
2824 posts in 1820 days
#6 posted 10-24-2010 11:41 AM
A quick thought..
Lee Valley actualy sold seperately the quarter 20 speed nuts for their four corner clamp rig.
I made a huge one for chair work, all you do is have the nut backed off a bit, it moves “sideways” and disengages the thread, then you slide it up to the point you need it and tighten.
-- Glen, B.C. Canada
16098 posts in 3258 days
#7 posted 10-24-2010 03:19 PM
Consider those ideas stolen!
-- Charlie M. "Woodworking - patience = firewood"
Eric in Florida.
3750 posts in 2615 days
#8 posted 10-24-2010 03:47 PM
Now those are some clamps I think I can afford.And thanks racerglen for the info about the sliding nuts.
-- Nothing is particularly hard if you divide it into small jobs ~ Henry Ford
1983 posts in 2504 days
#9 posted 10-25-2010 04:05 PM
Sliding nuts, who would have ever thought. That is just the thing that takes this entire concept to a new level. Thanks RickRogers7 and racerglen!
-- "Man's ingenuity has outrun his intelligence" (Joseph Wood Krutch)
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics