Custom coat rack for GasMonkey Garage

  • Advertise with us
Project by Cedar Furniture Lodge posted 08-02-2018 08:14 PM 797 views 0 times favorited 11 comments Add to Favorites Watch

I love this show and wanted to do something crazy, so we were laying around with photo transfer ideas. We found a way to do it with a regular inkjet printer and have to say it came out great. So we made a coat and hat rack and sent it to Mr Richard Rawlings himself.

-- "The Cedar King"

11 comments so far

View Hawaiilad's profile


3232 posts in 3106 days

#1 posted 08-02-2018 08:29 PM

Very nice. Are you going to share with us how you did the transfer?

-- Larry in Hawaii,

View Monte Pittman's profile

Monte Pittman

29672 posts in 2424 days

#2 posted 08-02-2018 10:01 PM

Very nice. Never tried that type of transfer.

-- Nature created it, I just assemble it.

View Desert_Woodworker's profile


1542 posts in 1300 days

#3 posted 08-03-2018 01:38 AM

it rocks

-- Desert_Woodworker

View therealSteveN's profile


924 posts in 660 days

#4 posted 08-03-2018 05:44 AM

Awesome. I get the feeling he will get back in touch, just seems to be a regular guy, and that is a great item for him, or the show.

Thanks for posting, and Congrats on your 3.

-- Think safe, be safe

View MJR's profile


118 posts in 500 days

#5 posted 08-03-2018 09:48 AM

Nice! Love the show too, How did you get the transfer to work with an inkjet? I’ve only seen it work well with a laser printer

View John Smith's profile

John Smith

1253 posts in 248 days

#6 posted 08-03-2018 10:48 AM

nicely done !!
ditch those dainty little hangers and find some crankshaft bearing halves
and mount them as hangers instead – that would be more appropo.
again, nice job (and congrats on the Top Three).

-- Graduated Valedictorian from the University of HardKnocks --

View Cedar Furniture Lodge 's profile

Cedar Furniture Lodge

819 posts in 2358 days

#7 posted 08-03-2018 02:59 PM

Thanks Everyone for the kind words, this is how we did it with a inkjet. I used photo transfer paper we bought on Amazon $25.00 for 20 sheets, it’s made to use with an inkjet printer. Print your image in mirror so it comes out backwards, that way when you lay it on our board, it will transfer right side up. Use a regular iron with no water, the heat from the iron will transfer the ink. I hope this helps.

-- "The Cedar King"

View Gene Howe's profile

Gene Howe

10724 posts in 3514 days

#8 posted 08-03-2018 03:33 PM

The method for a Laser Jet is essentially the same except the paper could be the label sheets with the labels removed. Print on the shiny side.
However, that may be the same paper the OP purchased as transfer paper.

-- Gene 'The true soldier fights not because he hates what is in front of him, but because he loves what is behind him.' G. K. Chesterton

View Cedar Furniture Lodge 's profile

Cedar Furniture Lodge

819 posts in 2358 days

#9 posted 08-03-2018 06:46 PM

Yep but the paper were using is a better quality and can also transfer to clothes too, not just wood. I rather spend a few dollars and have it look good rather than hookie,just my thought.

-- "The Cedar King"

View pottz's profile


2877 posts in 1070 days

#10 posted 08-03-2018 09:46 PM

yeah thats real cool looking,he’s gotta love it.if he responds back make sure and let us know his response.hey maybe we will see it on the the show.

-- sawdust the bigger the pile the bigger my smile-larry,so cal.

View Jim Jakosh's profile

Jim Jakosh

20927 posts in 3191 days

#11 posted 08-07-2018 04:33 PM

Nice coat rack and the transfer it perfect! Did you use acrylic poly to transfer the image?


-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics