LumberJocks

Picnic Table

  • Advertise with us
Project by kimosawboy posted 07-31-2018 02:57 PM 575 views 0 times favorited 2 comments Add to Favorites Watch

Large picnic table..
Custom cut W. red cedar, 2.25” x 6” @10’ (15 pc.)
Overall length came out at 9’, table top width at 40”.
Everything was left rough cut, I used a router to soften the edges and a Pocket Surform to lightly go over the top and seats.
Table top fastened with 6” ceramic screws and holes plugged afterwords. Simple 3/8 carriage bolts hold the main structure together.
Before assembly everything was given one coat of Duckback stain(translucent), while the tops of seats and table got two coats.
Was assembled in place as the top was enough for two to have a hard time with. Fun Fun

G Vavra





2 comments so far

View Druid's profile

Druid

1872 posts in 2945 days


#1 posted 07-31-2018 08:51 PM

Looks great, and it’s a good size for a get-together. Wonderful accessory for your BBQ. ;)

-- John, British Columbia, Canada

View PJKS's profile

PJKS

62 posts in 671 days


#2 posted 08-01-2018 11:38 AM

Lots of seating !! Well done !!

-- Pat / Colorado

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com