LumberJocks

4 Piece Hollow Form

  • Advertise with us
Project by Jim Jakosh posted 07-09-2018 08:57 PM 613 views 1 time favorited 26 comments Add to Favorites Watch

I was going through withdrawal from not doing any wood turning for a while so I glued up these 4 pieces of a real open grain wood ( I had spit this log but I don’t know what it is) with walnut strips in between and got some practice in. It was hollowed from the bottom and then turned to shape. The bottom piece blew apart into 4 pieces when I was turning it to fit the bottom but I found all the pieces and glued them back the best I could. I had to use that piece because it had the walnut lines in it and 2 of them are offset a little bit from the repair I did.

it is 11 1/2” high and 4 1/2” at the widest point. I thought it needed to be finished of with a top so I turned the flame shaped stopper out of Jarrah.

The pieces are finished with Danish oil and gloss wipe on Poly.

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!





26 comments so far

View recycle1943's profile

recycle1943

1953 posts in 1678 days


#1 posted 07-09-2018 09:03 PM

it appears to be a nice piece despite the blow out but pardon my ignorance, what will it be used for or is it strictly eye candy ?

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Joe Lyddon's profile

Joe Lyddon

10155 posts in 4108 days


#2 posted 07-09-2018 09:10 PM

Looks like you wanted to be able to EXPLODE the views of it…

Very nice bordom solver… :)

COOL…

-- Have Fun! Joe Lyddon - Alta Loma, CA USA - Home: http://www.WoodworkStuff.net ... My Small Gallery: http://www.ncwoodworker.net/pp/showgallery.php?ppuser=1389&cat=500"

View lew's profile

lew

12154 posts in 3811 days


#3 posted 07-09-2018 09:26 PM

Nice Save!!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View ralbuck's profile

ralbuck

4711 posts in 2322 days


#4 posted 07-09-2018 10:38 PM

A nice unit and a great rescue too!

Wood rescue can have more than one method!

-- Wood rescue is good for the environment and me! just rjR

View Mark Wilson's profile

Mark Wilson

2172 posts in 1119 days


#5 posted 07-09-2018 10:53 PM

Dandy piece, Jim.

-- Mark

View doubleDD's profile

doubleDD

7494 posts in 2098 days


#6 posted 07-10-2018 12:04 AM

Practice turning is fun turning and you learn something in the process. Cool.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Bob Collins's profile

Bob Collins

2522 posts in 3739 days


#7 posted 07-10-2018 12:23 AM

Nice finish to a practice run Jim, good rescue and result.

-- Bob C, Australia. Your best teacher is your last mistake.

View Jim Jakosh's profile (online now)

Jim Jakosh

20778 posts in 3161 days


#8 posted 07-10-2018 01:39 AM

Thanks for looking and the nice comments. I feel better now that I got to turn some last week!

Hi Dick, it will be a sit on the shelf piece for now!

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View Monte Pittman's profile

Monte Pittman

29572 posts in 2393 days


#9 posted 07-10-2018 02:33 AM

Your work is always awesome sir.

-- Nature created it, I just assemble it.

View John's profile

John

1191 posts in 1325 days


#10 posted 07-10-2018 06:18 AM

Good job on the cutting, glue up and turning Jim!

-- John, Sunshine Coast, BC, Canada.

View  woodshaver Tony C   's profile

woodshaver Tony C

6063 posts in 3408 days


#11 posted 07-10-2018 12:14 PM

Just like Humpty Dumpty…. you did put him back together again. Nice work Jim!

-- St Augustine FL, Experience is the sum of our mistakes!

View Jim Jakosh's profile (online now)

Jim Jakosh

20778 posts in 3161 days


#12 posted 07-10-2018 01:02 PM

Thanks Monty John and Tony

Hi Tony. It is a good thing I can still hear because I heard 3 of the pieces that broke out hit my steel rack and I had to fish them out to finish this thing.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View helluvawreck's profile

helluvawreck

31736 posts in 2922 days


#13 posted 07-10-2018 01:29 PM

You did a beautiful job on this fine hollow form. Congratulations.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View  woodshaver Tony C   's profile

woodshaver Tony C

6063 posts in 3408 days


#14 posted 07-10-2018 01:40 PM

Jim,
I can’t tell you how many time I dropped something on the floor or something goes flying and it just disappears into the shop. I can’t get motivated again to finish my project until I find the darn thing.

-- St Augustine FL, Experience is the sum of our mistakes!

View ZAGREB's profile

ZAGREB

899 posts in 1705 days


#15 posted 07-10-2018 04:20 PM

very nice, buddy,very nice

-- bambi

showing 1 through 15 of 26 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com