LumberJocks

Silly Little Mystery Project

  • Advertise with us
Project by smitty22 posted 10-15-2010 09:55 PM 2152 views 0 times favorited 29 comments Add to Favorites Watch

Not much of project, but it solved a problem that has irritated me for many years.

Anyone that guesses the real application gets my respect!

Will post the answer shortly.

-- Smitty





29 comments so far

View JJohnston's profile

JJohnston

1578 posts in 1948 days


#1 posted 10-15-2010 10:08 PM

Motorcycle/bike stand?

Garage parking stop?

-- "Sorry I'm late. Somebody tampered with my brakes." "You should have been early, then."

View JamesVavra's profile (online now)

JamesVavra

286 posts in 1972 days


#2 posted 10-15-2010 10:27 PM

I suspect it is shown upside down. It’s a lid of some sort? Hinged on what is the right-hand, back edge of the 3rd picture?

James

View smitty22's profile

smitty22

596 posts in 1603 days


#3 posted 10-15-2010 10:31 PM

Good guesses, might even make another one for the bike stand!
It’s right side up, no hinges. No cigar yet.

Don’t know why I”m messing with this when I ought to be outside digging fencepost holes.

-- Smitty

View CharlieM1958's profile

CharlieM1958

15698 posts in 2875 days


#4 posted 10-15-2010 10:34 PM

It’s for protecting the blade of your miter saw when stored with the blade in the down position?

-- Charlie M. "Woodworking - patience = firewood"

View JJohnston's profile

JJohnston

1578 posts in 1948 days


#5 posted 10-15-2010 10:36 PM

Stand for your folding sawhorses?

-- "Sorry I'm late. Somebody tampered with my brakes." "You should have been early, then."

View BreakingBoardom's profile

BreakingBoardom

615 posts in 1738 days


#6 posted 10-15-2010 10:39 PM

For use with your miter saw to hold something?

-- Matt - http://breakingboardom.wordpress.com/

View StevenAntonucci's profile

StevenAntonucci

355 posts in 2595 days


#7 posted 10-15-2010 10:52 PM

I’m guessing it stores all of the manuals to your shop equipment?

-- Steven

View Cozmo35's profile

Cozmo35

2198 posts in 1692 days


#8 posted 10-15-2010 11:34 PM

It’s one of those what-cha-ma-call-its for the doo-ma-fatchet thingy! You know….

-- If you don't work, you don't eat!.....Garland, TX

View Sodabowski's profile

Sodabowski

2012 posts in 1489 days


#9 posted 10-15-2010 11:48 PM

@ algale LOL

-- Holy scrap Barkman!

View Woodstock's profile

Woodstock

235 posts in 1944 days


#10 posted 10-16-2010 12:58 AM

My guess is rather mundane but I’m thinking what the picture shows as the bottom is really a tip out / slide out door front for some sort of laundry room cabinet. The small frame is to hold a box of powdered detergent.

(Told you it was rather mundane.)

On second thought after rereading Smitty’s response above about it being right side up…... a 9-pak TP holder for under the bathroom sink?

-Dave
(Gawd. I got to get motivated and a life. Or at least another pot of coffee…..)

-- I'm not old. Just "well seasoned".

View GMman's profile

GMman

3902 posts in 2354 days


#11 posted 10-16-2010 01:06 AM

Great job buddy

View JoshJock's profile

JoshJock

94 posts in 1499 days


#12 posted 10-16-2010 01:21 AM

ITS A PONY!!!!

-- "Does this lathe makes my butt look big?"

View JJohnston's profile

JJohnston

1578 posts in 1948 days


#13 posted 10-16-2010 02:44 AM

Actually, I just realized it looks like part of a homemade hose or cord reel.

-- "Sorry I'm late. Somebody tampered with my brakes." "You should have been early, then."

View smitty22's profile

smitty22

596 posts in 1603 days


#14 posted 10-16-2010 02:59 AM

OK, thanks for the fun, I’ve enjoyed the creative ideas immensly! N6DSW was on the right track, however, it’s even more mundane than his or other ideas, just a simple divider for armoire/chest so I can find my daggone white socks!

Was really hoping someone might comment on the precision dado and miter work, the artful selection of fine hardwood, or perhaps the flawless finish. LoL.

-- Smitty

View Woodstock's profile

Woodstock

235 posts in 1944 days


#15 posted 10-16-2010 03:34 AM

Well I at least got it into the house…..

(Sitting back enjoying my 4th half of a cup of coffee. Yes indeed. The world seems slightly more in focus now..)

Oh well. Back to fighting my day long battle with “AutoCAD designing idea blockage” for an shop equipment rack.

Thanks for the diversion.

-Dave
Sometimes I wish my projects WERE this mundane. Can you say “over-engineered”?

-- I'm not old. Just "well seasoned".

showing 1 through 15 of 29 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase