LumberJocks

stave vase

  • Advertise with us
Project by poospleasures posted 07-01-2018 11:13 PM 764 views 2 times favorited 15 comments Add to Favorites Watch

This is a project I wanted to do for a long time. My LJ friend Bambi posted his stave turning a little while back. Got a top 3. WOW. Checked with him on the jig he used and he sent me pictures. Made mine similar and it worked great. I am kinda proud of how these two came out. I have had this splatted wood for a long while (the mill guy said it was splatted maple maybe) anyway it is very nice. The larger vase is a bit taller and more flared than than the smaller and does not have the walnut inserts but each piece does have a black splat line in it. The wifey soon decided what should fit into each one. Now they are hers. Turned the glued on segmented walnut top and bottom rings same while turning the vase bodys. The last picture shows the half glued bodys being cut to length
on the band saw. Thanks for looking. Questions and comments welcome

-- I,ve had amnesia for as long as I can remember. Vernon





15 comments so far

View Dave Polaschek's profile

Dave Polaschek

2870 posts in 788 days


#1 posted 07-02-2018 12:26 AM

Pretty looking vases, Vernon! Looks a lot like a drinking mug I’m pondering coopering together for the beer swap Kenny’s going to run this summer, though I probably won’t have such pretty wood.

-- Dave - Minneapolis

View Jim Jakosh's profile (online now)

Jim Jakosh

21752 posts in 3311 days


#2 posted 07-02-2018 12:36 AM

Very nice work, Vernon!!

Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View woodbutcherbynight's profile

woodbutcherbynight

5729 posts in 2614 days


#3 posted 07-02-2018 01:16 AM

That is awesome. My Mother would tell me not to touch them, they are for show…

LOL

-- Live to tell the stories, they sound better that way.

View Woodknack's profile

Woodknack

12431 posts in 2586 days


#4 posted 07-02-2018 02:12 AM

Nice looking stave cannisters. I’d like to try that someday.

-- Rick M, http://thewoodknack.blogspot.com/

View Jerry's profile

Jerry

2900 posts in 1854 days


#5 posted 07-02-2018 02:26 AM

Those are pretty cool.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View recycle1943's profile

recycle1943

2527 posts in 1828 days


#6 posted 07-02-2018 02:34 AM

Both are outstanding
Larger one with the spalted black appearing to be dividers is a real eye catcher, can’t quit looking at it
Great job on both Vernon

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View doubleDD's profile

doubleDD

7902 posts in 2249 days


#7 posted 07-02-2018 02:39 AM

Well done Vernon. I’m sure they are harder to do than they look. I like the utensil one.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View ZAGREB's profile

ZAGREB

1089 posts in 1855 days


#8 posted 07-02-2018 01:04 PM

I am realy proud with your work,you made it better than me
if you go to weaning do not tell your wife that I’m the culprit
have a nice day Buddy

-- bambi

View Lazyman's profile

Lazyman

2644 posts in 1593 days


#9 posted 07-02-2018 01:37 PM

Very nice. Going on my favorites list to someday try myself.

-- Nathan, TX -- Hire the lazy man. He may not do as much work but that's because he will find a better way.

View HokieKen's profile (online now)

HokieKen

7189 posts in 1344 days


#10 posted 07-02-2018 02:29 PM

Excellent work Vernon! Will transfer very nicely to beer mug construction ;-)

-- Kenny, SW VA, Go Hokies!!!

View jeffswildwood's profile

jeffswildwood

3613 posts in 2183 days


#11 posted 07-02-2018 02:58 PM

Very nice Vernon! That is something I really need to try. Looks like a beautiful way to use those small pieces of scrap I have horded! I might get with you on making the jig, and doing the angle measurements.

-- We all make mistakes, the trick is to fix it in a way that says "I meant to do that".

View majuvla's profile

majuvla

13399 posts in 3073 days


#12 posted 07-02-2018 06:49 PM

Indeed nice shape and wood combination and stripes.

-- Ivan, Croatia, Wooddicted

View recycle1943's profile

recycle1943

2527 posts in 1828 days


#13 posted 07-02-2018 10:17 PM

Congrats on top 3 Vernon – well deserved

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View poospleasures's profile

poospleasures

776 posts in 2690 days


#14 posted 07-02-2018 11:31 PM

Thanks to everyone for your comments. As always makes me feel good when folks with your skills like my stuff. Dave and Kenny I not thought of mugs. Will think more on that. Jim, Woodbutcher, Rick, Jerry, DoubleDD, Majuvla and Bambi thanks for always looking and commenting. Dick it means a lot for your colorful comments, congrats to you also for a 3. Jeff hows the back? Let me know when your ready to make staves.

-- I,ve had amnesia for as long as I can remember. Vernon

View Rick S...'s profile

Rick S...

10913 posts in 3238 days


#15 posted 07-03-2018 02:30 AM

Very Nice and Well Done!

Rick

-- I Chose "The Road Less Travelled" Now I'm Totally Lost! (Ontario, CANADA)

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com