| Project by Jeremy | posted 951 days ago | 2116 views | 3 times favorited | 4 comments |  |
 |
I needed an extra work bench when I saw this on kregjig.com. It looked simple enough and cheap. So I made this in about 5 hrs. And I wired it so I can plug the table into the wall and I have 4 outlets on the table itself. So far I really like it. Strong, sturdy, cheap, and easy. Everything I want out of a work bench.
| Pin It |
4 comments so far
Jonathan
home | projects | blog
2568 posts in 1218 days
#1 posted 951 days ago
This was one of the first things I built maybe 9-months ago now after getting into woodworking.
It’s a good size… not too big and not too small.
I also put 2-layers of 3/4”MDF on the top and would advise others thinking about building it to do the same, just as you’ve done here. I did not glue them together though, figuring that if I just screwed them together from below that I could change out the top layer of MDF rather easily.
I like your addition of power. Mine is not wired-up.
-- Jonathan, Denver, CO "Constructive criticism is welcome and valued as it gives me new perspectives and helps me to advance as a woodworker."
Radu
home | projects | blog
240 posts in 1211 days
#2 posted 951 days ago
It’s looking good. Any extra work space is a plus.
clieb91
home | projects | blog
2674 posts in 2103 days
#3 posted 947 days ago
Nice addition to the shop. Gotta love that Kreg Jig.
CtL
-- Chris L. "Don't Dream it, Be it."
bvdon
home | projects | blog
454 posts in 1183 days
#4 posted 869 days ago
nice work space.
-- http://woodwork.me
Have your say...