LumberJocks

A jig to sharpening

  • Advertise with us
Project by Rotceh posted 10-09-2010 01:04 AM 4030 views 17 times favorited 14 comments Add to Favorites Watch

this jig for the Grinder, is to make the first sharp of chisel blade. It have got a 25 degree, and have got a slider to make a straight sharp on a chisel.You only must to ajust the chisel near the stone, turn the nut. the chisel always is a line with the stone because the screws are on line with the stone.

Esta plantilla para afilar, es para recuperar el filo de formones y cuchillas, para realizar el afilado bruto, por a si decirlo. Esta a 25 grados, y tiene un deslizador para sacar el filo recto sin esfuerzo, y sin que se tuerza.Se ajusta el formon o la cuchilla a la piedra, y se fija con las palomillas.el tornillo de abajo y la palomilla estan en linea con la piedra, por lo que es muy facil colocar el formon en la posicion correcta para consegir el afilado recto.Es un esmaril barato, ya que es para rectificar.Despues ya viene el afilado mas fino.

-- Work is my road to knowledge,Curiosity is my fellow traveler. El trabajo es mi camino al conocimiento, la curiosidad es mi compañero de viaje. Héctor





14 comments so far

View RonPeters's profile

RonPeters

708 posts in 1532 days


#1 posted 10-09-2010 03:51 AM

Eso es muy lindo!

-- “Once more unto the breach, dear friends...” Henry V - Act III, Scene I

View swirt's profile

swirt

1945 posts in 1624 days


#2 posted 10-09-2010 04:04 AM

Very nice.

-- Galootish log blog, http://www.timberframe-tools.com

View Houtje's profile

Houtje

299 posts in 1624 days


#3 posted 10-09-2010 07:39 AM

That’s a very nice jig….

Houtje

View jockmike2's profile

jockmike2

10635 posts in 2898 days


#4 posted 10-09-2010 11:53 AM

Great useful jig.

-- (You just have to please the man in the Mirror) Mike from Michigan -

View Julio 's profile

Julio

173 posts in 1532 days


#5 posted 10-09-2010 01:39 PM

muy bueno amigo, es algo muy util para ahorrar una barbaridad de tiempo, que rabia cuando se cae un formon y se escoña una esquina, para mi es la peor parte del afilado, el rectificado y recuperacion del bisel. No tengo esmeril pero esto me lo apunto por si acaso algun dia me hago con una. Desde lluego que este proyecto es una gran ayuda para ahorrarse comprar algun tipo de guia. Lo califico de imprescindible, que profesional
Gracias hasta pronto

View mafe's profile

mafe

9509 posts in 1741 days


#6 posted 10-09-2010 02:20 PM

Such a cool jig.
Best thoughts,
Mads

-- Mad F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

View ramon's profile

ramon

153 posts in 1836 days


#7 posted 10-09-2010 10:51 PM

Me gusta,es un sistema muy parecido al que utiliza Tormek en sus piedras de agua solo que este es mas amplio y barato.A mi me gustan bastante estas piedras de alta velocidad,para las herramientas de tornear es la unica que utilizo y un apoyo de estos me vendria bastante bien sobre todo para los largos formones de tornero,el unico problema es sacar tiempo para fabricarlo.Saludos.

View Jiri Parkman's profile

Jiri Parkman

950 posts in 2465 days


#8 posted 10-11-2010 12:15 PM

Useful jig. Enjoy it.

-- Jiri

View helluvawreck's profile (online now)

helluvawreck

15781 posts in 1519 days


#9 posted 10-11-2010 01:27 PM

Rotceh, that looks like a great sharpening jig and I’ll bet that it works really well.

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View Roger's profile

Roger

14556 posts in 1456 days


#10 posted 10-20-2010 02:10 AM

great idea.. I’m sure it works fine

-- Roger from KY. Work/Play/Travel Safe. Kentuk55@bellsouth.net

View a1Jim's profile

a1Jim

112080 posts in 2229 days


#11 posted 10-20-2010 02:16 AM

The jigs up ,nice job

-- http://artisticwoodstudio.com Custom furniture

View jamesf's profile

jamesf

12 posts in 1425 days


#12 posted 10-24-2010 11:14 PM

like it, i need 1 of those

-- james.foster50@ntlworld.com

View Dez's profile

Dez

1113 posts in 2729 days


#13 posted 10-24-2010 11:50 PM

Nice jig! I may have to steal your Idea!

-- Folly ever comes cloaked in opportunity!

View bigike's profile

bigike

4031 posts in 1940 days


#14 posted 12-31-2010 04:36 PM

great job

-- Ike, Big Daddies Woodshop, http://www.icombadaniels@yahoo.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase