newTim is Flipp'in

  • Advertise with us
Project by newTim posted 06-09-2018 09:09 PM 1155 views 5 times favorited 5 comments Add to Favorites Watch

Here’s my entry in the flipp’in tool cart. It is taller and wider than most, then again so am I. Ba da da… yup, we’re gonna be here all week. Pictures are self explanatory. Lots of plans, photos, and videos available on the regular channels. Only change I would’ve made is to make the sides a bit thicker. I probably would have laminated two 1/2” ply’s or perhaps a 1/4” or 1/2” to a 3/4” ply to make the sides 1” to 1 1/4” thick. Other than that it seems to work great. Time will tell.

-- tim hill

5 comments so far

View Clarkswoodworking's profile


287 posts in 339 days

#1 posted 06-10-2018 01:26 AM

I like it ‘

View woodbutcherbynight's profile


5729 posts in 2614 days

#2 posted 06-10-2018 01:53 AM

Nice work. You could also beef up the sides by doing a picture frame set up with 3/4×1 1/2 inch boards.

Something like this: It is a support for a table top so I milled down 2×4’s to accommodate my requirements but you could go thinner as you wished. Still very strong and no exposed plywood edges.

-- Live to tell the stories, they sound better that way.

View BearcraftedCed's profile


7 posts in 440 days

#3 posted 06-10-2018 05:23 AM

You finally built it! Looks great..

Conrgrats on the rotary planer! Badumtiss ;)

View helluvawreck's profile


32087 posts in 3072 days

#4 posted 06-10-2018 11:42 AM

You have done a fine job on this cart and it will be a great addition to you shop.

-- helluvawreck aka Charles,

View SeesWoodworks's profile


9 posts in 242 days

#5 posted 06-27-2018 11:16 PM

Nice work. Gotta make me one of those!

-- Be who you want to be

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics