or Join Now!
this round table is designed by myself and is my first design which had came to production. my friend made it acording my design. it has made of beech and finished mahogany.
I would like to see what others think about it. thanks
home | projects | blog
147 posts in 1676 days
Preview this project card
71 posts in 1913 days
#1 posted 10-07-2010 08:53 PM
Very nice design. Your friend did avery nice job of production.
-- Ralph New Hampshire, www.realcomtel.com
2455 posts in 1922 days
#2 posted 10-07-2010 09:08 PM
Nice Looking Table !!!
-- Pat - Worker of Wood, Collector of Tools, Father of one
2992 posts in 2383 days
#3 posted 10-07-2010 09:23 PM
Another Stunning Piece, my Friend… A very unique and original design… Wonderful!!
-- Mike in Concord, NH---Unpleasant tasks are simply worthy challenges to improve skills.
2158 posts in 1714 days
#4 posted 10-07-2010 09:27 PM
Your design is very unusual and I find it quite interesting! I find it well balanced, with just enough classical elements.
-- Pondering the inclusion of woodworking into physics and chemistry classes...
#5 posted 10-07-2010 09:36 PM
thanks . :-)
1137 posts in 1951 days
#6 posted 10-07-2010 11:06 PM
Beautiful workmanship as always. How have you constructed the leg ? is it in three sections to retain the long grain for strength? it looks quite a challengeWell done
-- God created wood that we may create. Trevor East Yorkshire UK
#7 posted 10-07-2010 11:39 PM
great smart question tdv. and how did you figuer out that it has made of 3 parts?? specially now that it has finished. it is interesting for me that you have pointed at the right point, yes my friend used a smart trick to construct these parts up together. he didnt cut parts as the shape you see right now and remained some parts to put clamps on it to adhere the parts together. after it dryes he cut thoe excessive parts. :)
963 posts in 2905 days
#8 posted 10-07-2010 11:55 PM
Beautiful piece! Is it based on a historic design?
-- Robert - Visit my woodworking blog: http://littlegoodpieces.wordpress.com
#9 posted 10-08-2010 12:01 AM
thanks, yes l have inspired from a design of a bench from 18 century, it was italian bench
104 posts in 2040 days
#10 posted 10-08-2010 01:04 AM
stunning work vahid!
113222 posts in 2458 days
#11 posted 10-08-2010 01:27 AM
Fantastic workmanship and unique design but to be honest my first thought was how long will those legs hold up given the sharp turn the legs make,there has to be a point where the grain makes those legs susceptible to breaking.As a design it’s very wonderful to look at and who could question the great art in making such a piece.
-- http://artisticwoodstudio.com Custom furniture
3474 posts in 2409 days
#12 posted 10-08-2010 04:35 AM
Beautiful design, for sure! Great build too. Excellent project.
-- mtnwild (Jack), It's not what you see, it's how you see it.
1 post in 1917 days
#13 posted 10-08-2010 04:39 AM
good naight thatis good work reley and the finish is very very nicehttp://sakan.tm2store.com
#14 posted 10-08-2010 09:06 AM
again thank you. once the table become ready I asked my friend (he is pretty heavy) to stand over the table and move, to check how strong it is. fortunately it passed that exam. it was critical for me to save that sharp angle of leg.
again thanks to pay attention and time . every comment is welcomed.
the height of table is 79cm and the flat is 60 cm.
2199 posts in 1917 days
#15 posted 10-08-2010 02:26 PM
-- If you don't work, you don't eat!.....Garland, TX
View all comments »
showing 1 through 15 of 17 comments
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics