LumberJocks

Lidded Box- One way to do the lid

  • Advertise with us
Project by Grumpy posted 05-26-2018 04:08 AM 1012 views 1 time favorited 16 comments Add to Favorites Watch

This was a piece of an old hardwood post (possibly terpentine), a support for an above ground pool, many moons ago.
The lid is fitted with a pvc ring I fashioned off a piece of 90mm pipe. It’s a good way of maintaining the grain pattern on the outside with minimum waste.
Finished with several coats (lost count) of wipe on poly

-- Grumpy - "Always look on the bright side of life"- Monty Python





16 comments so far

View Karson's profile

Karson

35134 posts in 4547 days


#1 posted 05-26-2018 04:12 AM

I’ve never seen a piece of PVC look so good.

Just think what you could do with some real good material.

-- I've been blessed with a father who liked to tinker in wood, and a wife who lets me tinker in wood. Southern Delaware soon moving to Virginia karsonwm@gmail.com †

View Grumpy's profile

Grumpy

24395 posts in 3998 days


#2 posted 05-26-2018 04:30 AM

Surprised me too Karson.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View Woodwrecker's profile

Woodwrecker

4191 posts in 3722 days


#3 posted 05-26-2018 05:17 AM

Nice job there Grumpy my friend.

View Bob Collins's profile

Bob Collins

2566 posts in 3830 days


#4 posted 05-26-2018 07:10 AM

Nice work Grumpy, especially the use of the PVC ring.

-- Bob C, Australia. Your best teacher is your last mistake.

View Mark Wilson's profile

Mark Wilson

2254 posts in 1210 days


#5 posted 05-26-2018 07:18 AM

Wonderful piece, aTony. Did you photograph it on a manhole cover?

-- Mark

View Lee A. Jesberger's profile

Lee A. Jesberger

6864 posts in 4126 days


#6 posted 05-26-2018 11:49 AM

Nice job, Tony !

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

View Jim Jakosh's profile

Jim Jakosh

21306 posts in 3252 days


#7 posted 05-26-2018 12:29 PM

Nice work, Tony Good save to that old piece of post! I like to use PVC inside too for threaded lids.

Cheers, Jim

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View helluvawreck's profile

helluvawreck

32083 posts in 3013 days


#8 posted 05-26-2018 01:03 PM

Grumpy, that is a beautiful box and I love the lid. Congratulations.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View  woodshaver Tony C   's profile

woodshaver Tony C

6176 posts in 3499 days


#9 posted 05-26-2018 01:31 PM

Nce work Tony! I use PVC sometimes! Good stuff!

-- St Augustine FL, Experience is the sum of our mistakes!

View bushmaster's profile

bushmaster

3234 posts in 2429 days


#10 posted 05-26-2018 03:13 PM

Great looking project, good idea about using a separate ring,

-- Brian - Hazelton, British Columbia

View peteg's profile

peteg

4387 posts in 2969 days


#11 posted 05-26-2018 07:57 PM

Nice job, always good to play with other media :)
cheers
Pete

Well done DT3

-- Pete G: If you always do what you always did you'll always get what you always got

View doubleDD's profile

doubleDD

7703 posts in 2190 days


#12 posted 05-27-2018 01:52 AM

A few more coats on the pvc and you have a match. LOL. Nice job buddy.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View robscastle's profile

robscastle

5313 posts in 2351 days


#13 posted 05-27-2018 04:26 AM

Looks like some very nice turning work there Grumpy.

I actually veneered some 90mm pipe some time ago, I dont remember what it was for.

Possibly had nothing better to do at the time!

Good work on the DT3

-- Regards Rob

View Grumpy's profile

Grumpy

24395 posts in 3998 days


#14 posted 06-01-2018 06:33 AM

Thanks for looking Jocks, much appreciated.

-- Grumpy - "Always look on the bright side of life"- Monty Python

View steliart's profile

steliart

2802 posts in 2835 days


#15 posted 06-01-2018 11:43 AM

nice work buddy !!!

-- Stelios L.A. Stavrinides: - I am not so rich to buy cheap tools, but... necessity is the mother of inventions !!!

showing 1 through 15 of 16 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com