LumberJocks

Bedside table

  • Advertise with us
Project by sugarpine posted 05-20-2018 05:34 PM 821 views 2 times favorited 7 comments Add to Favorites Watch

Made entirely from alder (no plywood, except for the drawer box). 29-1/2” tall, 19-1/2” deep, 31” wide. Lots of Kreg pocket screw joinery on this one. I attached the bullnose edging with splines instead of brad nailing to eliminate any nail holes. The last picture was provided by my customer. The dimensions were modified to downsize the table, eliminated the pull out writing table and made the top shelf with aprons to match the middle shelf.

-- sugarpine





7 comments so far

View Jerry's profile

Jerry

2834 posts in 1791 days


#1 posted 05-20-2018 06:17 PM

Really graceful! Great job on this one.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be. http://www.geraldlhunsucker.com/

View Ottacat's profile

Ottacat

493 posts in 1994 days


#2 posted 05-20-2018 06:33 PM

Really nicely done, such a unique piece.

View oldnovice's profile

oldnovice

7189 posts in 3510 days


#3 posted 05-21-2018 01:07 AM

A very well built table.
Exquisitely clean and beautifully detailed!

-- "I never met a board I didn't like!"

View majuvla's profile (online now)

majuvla

13009 posts in 3010 days


#4 posted 05-21-2018 05:43 AM

So beautiful rustic/retro design, yet with clean lines.

-- Ivan, Croatia, Wooddicted

View helluvawreck's profile

helluvawreck

32083 posts in 3009 days


#5 posted 05-21-2018 01:17 PM

This is a very nice design and you did a wonderful job on it.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View ChrisK's profile

ChrisK

1996 posts in 3224 days


#6 posted 05-22-2018 10:28 AM

Very elegant, nice work.

-- Chris K

View ohwoodeye's profile

ohwoodeye

2051 posts in 3296 days


#7 posted 05-24-2018 12:55 PM

This is the 3rd time I have come back to your project.
I really like the looks of this and want to make one.
I really have no use for it or anywhere to put it for that matter….......but I just want to build it.
Very nicely done.

-- Directions are just the Manufacturer's "opinion" on how something should be assembled. ----Mike, Waukesha, WI

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com