LumberJocks

Stickley Console Table

  • Advertise with us
Project by Evans_Woodcrafts posted 05-02-2018 12:14 PM 1195 views 7 times favorited 17 comments Add to Favorites Watch

As part of my commitment to share my work more, here is a console table I finished in early April. After browsing Stickley’s site, I became inspired to produce some Arts & Crafts style furniture for our entry way & living room. I really like the lines of this mission style furniture, particularly the use of QSWO. Construction mainly consisted of floating tenons, the drawer construction is dovetailed soft maple. I ended up using side mount drawer slides and wish I would’ve just used some light duty under mounts instead; I was concerned about losing drawer depth. The finish on this piece (as well as the clock) was achieved by following Jeff Jewitt’s mission oak finish technique. It’s a multi step process that takes some time but its all worth it in the end I think. I went back and forth on different drawer pulls but ultimately went with authentic Stickley hardware that was purchased through Rockler, while not cheap, I thought it only made sense to go authentic. Thanks for viewing.





17 comments so far

View mattkollar's profile

mattkollar

4 posts in 174 days


#1 posted 05-02-2018 12:24 PM

Beautiful work. How do you have the lower shelf mounted?

View Ron Aylor's profile

Ron Aylor

2649 posts in 797 days


#2 posted 05-02-2018 02:36 PM

WOW! Gustav is most definitely smiling down on you. At first I thought it was an original. Kudos!

View Ben's profile

Ben

94 posts in 1387 days


#3 posted 05-02-2018 02:40 PM

Wow – awesome execution! Really beautiful work.

View CaptainSkully's profile

CaptainSkully

1601 posts in 3708 days


#4 posted 05-02-2018 03:06 PM

Awesome! This is right in my wheelhouse. We’re getting ready to move into our new house and these are the first batch of projects I’m going to be cranking out from my new shop. Thanks for the inspiration and a great example of Jeff’s finish. I’ll probably give that a try.

Here's the link to the Stickley online catalog just to compare. Yours is much better for many reasons.

-- You can't control the wind, but you can trim your sails

View Rick S.'s profile

Rick S.

10580 posts in 3182 days


#5 posted 05-02-2018 03:24 PM

Very Nice Indeed Evan! & Well Done Also!

-- (Rick S.)... "Don't Worry About What People Think! They Don't Do It Very Often!"

View pintodeluxe's profile

pintodeluxe

5758 posts in 2963 days


#6 posted 05-02-2018 03:36 PM

Great project! The finish is sublime.

-- Willie, Washington "If You Choose Not To Decide, You Still Have Made a Choice" - Rush

View WhattheChuck's profile

WhattheChuck

336 posts in 3710 days


#7 posted 05-02-2018 04:31 PM

Super-nice! Thanks for sharing.

-- Chuck, Pullman, WA

View helluvawreck's profile

helluvawreck

32083 posts in 3016 days


#8 posted 05-02-2018 06:00 PM

That is a beautiful Stickley table and you did a wonderful job on it.

-- helluvawreck aka Charles, http://woodworkingexpo.wordpress.com

View therealSteveN's profile

therealSteveN

1411 posts in 724 days


#9 posted 05-02-2018 07:07 PM

Awesome all the way around, wood, design, and execution.

I recently made an A&C desk for LOML, ended up making it in Cherry because I couldn’t source any decent QS Oak. I’m less than 60 miles from the largest producer of QS Oak in America, probably the world (Frank Miller Lumber) and they are selling it off to Asia as fast as they get it ready to sell. This is a first time I couldn’t find any nice QS Oak ever.

-- Think safe, be safe

View awsum55's profile

awsum55

277 posts in 658 days


#10 posted 05-02-2018 07:52 PM

I really like A&C furniture and you did an incredible job on these pieces. I’ll have to look up the technique you mentioned for the finish, it’s beautiful. I usually fume my pieces and I’d like to see if there is a way that suits me better.

-- John D, OP, KS

View AandCstyle's profile

AandCstyle

3165 posts in 2406 days


#11 posted 05-02-2018 08:58 PM

Evan, that is a great looking piece especially with the clock. Thanks for sharing.

-- Art

View Evans_Woodcrafts's profile

Evans_Woodcrafts

16 posts in 960 days


#12 posted 05-02-2018 09:11 PM



Awesome! This is right in my wheelhouse. We re getting ready to move into our new house and these are the first batch of projects I m going to be cranking out from my new shop. Thanks for the inspiration and a great example of Jeff s finish. I ll probably give that a try.

Here s the link to the Stickley online catalog just to compare. Yours is much better for many reasons.

- CaptainSkully

Very familiar with that page! I used that same link to design mine. Many thanks!


Awesome all the way around, wood, design, and execution.

I recently made an A&C desk for LOML, ended up making it in Cherry because I couldn t source any decent QS Oak. I m less than 60 miles from the largest producer of QS Oak in America, probably the world (Frank Miller Lumber) and they are selling it off to Asia as fast as they get it ready to sell. This is a first time I couldn t find any nice QS Oak ever.

- therealSteveN

Wow, thats sad to hear. I’ve been fortunate to hand pick these boards but the pickens are getting slimmer for sure. Cherry is a nice substitute for A&C though.


I really like A&C furniture and you did an incredible job on these pieces. I ll have to look up the technique you mentioned for the finish, it s beautiful. I usually fume my pieces and I d like to see if there is a way that suits me better.

- awsum55

It’s my favorite style, at the moment anyways. Definitely check out Jeff’s technique. It’s a fantastic way to get similar results to fuming. You have to dedicate about a week to the finishing process though.

Thank you everyone for the kind words. I just finished a matching coffee table that Ill be sharing soon as well.

View wrenchhead's profile

wrenchhead

220 posts in 3313 days


#13 posted 05-02-2018 11:07 PM

The finish turned out amazing. Great looking project!

-- https://www.youtube.com/channel/UCkRuFxW8HhRfyhbTP4SY5UA I could quit if I wanted

View ravensrock's profile

ravensrock

497 posts in 1792 days


#14 posted 05-02-2018 11:07 PM

Just beautiful! Love the design and the grain in the QSWO!

-- Dave, York, PA, Wildside Woodworking

View MAO's profile

MAO

28 posts in 661 days


#15 posted 05-03-2018 02:25 AM

This is absolutely stunning! Love it…

Mark

-- MAO (Indiana)

showing 1 through 15 of 17 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com