LumberJocks

Shopsmith Router Table #3

  • Advertise with us
Project by oldguy2 posted 04-03-2018 12:33 AM 870 views 0 times favorited 1 comment Add to Favorites Watch

This should be the easy version to make. Remove your router table top to reuse for this table. I use number 4 electric clips to mount over the rails on the front of the Shopsmith. I found a comfortable height and cut a 2×2 for a front support and it will be clamped in place. one pic shows a bolt and 2 large washers, this is a clamp for over and under the pipe to hold the table in place. My fence is held in place with clamps. Since my insert lifts for bit height adjustment this also helps with storing the whole unit. remove the insert and router. unclamp the table and fence. and basically done. I can use my dust collection for the shopsmith to the rear mount on the fence. since the work flow will go the length of the shopsmith this will be a help in space in my shop. add an insert and this could be an outfeed table with an adjustable leg.





1 comment so far

View woodbutcherbynight's profile

woodbutcherbynight

5488 posts in 2492 days


#1 posted 04-03-2018 01:25 AM

A unique work around. Nice work!!

-- Live to tell the stories, they sound better that way.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com