LumberJocks

Walnut and Maple cutting board

  • Advertise with us
Project by Bliss Woodshop posted 03-16-2018 04:02 AM 1121 views 5 times favorited 14 comments Add to Favorites Watch

Maple and Walnut in brick and mortar pattern. This one came out bit longer and narrower than I would like it to be. But the black and white photos looks nice.

-- Be Bliss. @blisswoodshop on IG





14 comments so far

View Andre's profile

Andre

2063 posts in 1952 days


#1 posted 03-16-2018 05:55 AM

That looks fantastic!

-- Lifting one end of the plank.

View ChrisK's profile

ChrisK

2002 posts in 3227 days


#2 posted 03-16-2018 11:22 AM

Really good looking, nice work.

-- Chris K

View Bliss Woodshop's profile

Bliss Woodshop

52 posts in 2732 days


#3 posted 03-16-2018 12:43 PM

Thanks guys.

-- Be Bliss. @blisswoodshop on IG

View Scott Oldre's profile

Scott Oldre

1074 posts in 3577 days


#4 posted 03-16-2018 12:55 PM

looks very accurately cut. clean lines.

-- Scott, Irmo SC

View Paul M's profile

Paul M

117 posts in 1449 days


#5 posted 03-16-2018 02:52 PM

very cool

-- Paul M

View cmmyakman's profile

cmmyakman

200 posts in 2802 days


#6 posted 03-16-2018 05:07 PM

The finger holds are nice and I agree that the B&W pics look great.

-- You can't fail if you don't give up.

View AM420's profile

AM420

164 posts in 529 days


#7 posted 03-16-2018 05:38 PM

Very nice! I’ve been thinking of doing one of these myself. What are the I like the ratio of the bricks and mortar. What are the dimensions of the pieces?

View Bliss Woodshop's profile

Bliss Woodshop

52 posts in 2732 days


#8 posted 03-16-2018 07:09 PM

Thank You. Some thing nostalgic about black and white pictures….


The finger holds are nice and I agree that the B&W pics look great.

- cmmyakman


-- Be Bliss. @blisswoodshop on IG

View Bliss Woodshop's profile

Bliss Woodshop

52 posts in 2732 days


#9 posted 03-16-2018 07:21 PM

The whole board came out to be about 10” x 18.5” x 1.25” in thickness. The thickness of mortar maple is about .6875 or 11/16th and Walnut is about 1.875” or 1 7/8 th. The thickness of Maple and Walnut on initial glueup was .6875 or 11/16th as well.


Very nice! I ve been thinking of doing one of these myself. What are the I like the ratio of the bricks and mortar. What are the dimensions of the pieces?

- AM420


-- Be Bliss. @blisswoodshop on IG

View bobasaurus's profile

bobasaurus

3531 posts in 3330 days


#10 posted 03-16-2018 08:20 PM

Must be a pain to glue up. Looks very clean.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View Bliss Woodshop's profile

Bliss Woodshop

52 posts in 2732 days


#11 posted 03-16-2018 08:48 PM

This one actually wasn’t too bad. Got a little help during glue up. Also, got myself a Fulton 4 way clamp and that definitely helped my clamping process.


Must be a pain to glue up. Looks very clean.

- bobasaurus


-- Be Bliss. @blisswoodshop on IG

View BenDupre's profile

BenDupre

678 posts in 633 days


#12 posted 03-17-2018 03:22 AM

All in all it was all just…

Very cool!

-- The problem with communication is the illusion that it has occurred. – George Bernard Shaw

View majuvla's profile

majuvla

13038 posts in 3013 days


#13 posted 03-17-2018 01:38 PM

My favourite pattern. I like that black/white photo.

-- Ivan, Croatia, Wooddicted

View Bliss Woodshop's profile

Bliss Woodshop

52 posts in 2732 days


#14 posted 03-18-2018 06:24 PM

Thanks all for the appreciation.

-- Be Bliss. @blisswoodshop on IG

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com